TISP4219H3BJ 查看數據表（PDF） - Bourns, Inc
零件编号
产品描述 (功能)
生产厂家
TISP4219H3BJ
Bourns, Inc
TISP4219H3BJ Datasheet PDF : 15 Pages
| |||
TISP4xxxH3/M3BJ Series for LCAS Protection
TISP4125M3BJ & TISP4219M3BJ
Absolute Maximum Ratings, TA = 25 °C (Unless Otherwise Noted)
Rating
Repetitive peak off-state voltage, (see Note 7)
‘4125
‘4219
Non-repetitive peak on-state pulse current (see Notes 8 and 9)
2/10 µs (GR-1089-CORE, 2/10 µs voltage wave shape)
8/20 µs (IEC 61000-4-5, 1.2/50 µs voltage, 8/20 current combination wave generator)
10/160 µs (F CC Part 68, 10/160 µs voltage wave shape)
5/200 µs (VDE 0433, 10/700 µs voltage wave shape)
0.2/310 µs (I3124, 0.5/700 µs voltage wave shape)
5/310 µs (I TU-T K.20/21, 10/700 µs voltage wave shape)
5/310 µs (FTZ R12, 10/700 µs voltage wave shape)
10/560 µs (F CC Part 68, 10/560 µs voltage wave shape)
10/1000 µs (GR-1089-CORE, 10/1000 µs voltage wave shape)
Non-repetitive peak on-state current (see Notes 8, 9 and 10)
20 ms (50 Hz) full sine wave
16.7 ms (60 Hz) full sine wave
1000 s 50 Hz/60 Hz a.c.
Initial rate of rise of on-state current, Exponential current ramp, Maximum ramp value < 200 A
Junction temperature
Storage temperature range
Symbol
VDRM
ITSP
ITSM
diT/dt
TJ
Tstg
Value
Unit
±100
V
±180
300
220
120
110
A
100
100
100
75
50
30
32
2.1
300
-40 to +150
-65 to +150
A
A/µs
°C
°C
NOTES: 7. See Applications Information for voltage values at lower temperatures.
8. Initially, the TISP4xxxM3BJ must be in thermal equilibrium with TJ = 25 °C.
9. The surge may be repeated after the TISP4xxxM3BJ returns to its initial conditions.
10.EIA/JESD51-2 environment and EIA/JESD51-3 PCB with standard footprint dimensions connected with 5 A rated printed wiring
track widths. See Figure 11 for the current ratings at other durations. Derate current values at -0.61 %/°C for ambient
temperatures above 25 °C.
Recommended Operating Conditions
Component
Condition
Min Typ Max Unit
GR-1089-CORE first-level surge survival
10
Ω
Series current limiting GR-1089-CORE first-level and second-level surge survival
12
Ω
RS resistor
K.20, K.21 and K.45 coordination pass with a 400 V primary
6
Ω
protector
VRING AC ringing voltage
Figure 12, VBAT = -48 V ±2.5 V,
R1= R2 = 300 Ω, 0 °C < TA < +85 °C
Battery-backed
Ground-backed
87 V rms
101 V rms
JUNE 2001 – REVISED FEBRUARY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Share Link: