3
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-2611#XXXX
020 = 5000 V rms/1 minute UL Rating Option*
060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 Vpeak Option**
300 = Gull Wing Surface Mount Option†
500 = Tape and Reel Packaging Option
XXXE = Lead Free Option
Option data sheets available. Contact Agilent sales representative or authorized distributor for information.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July
2001 and lead free option will use “-”
*For 6N137, HCPL-2601/11/30/31 and HCPL-4661 (8-pin DIP products) only.
**For HCPL-2611 only. Combination of Option 020 and Option 060 is not available.
†Gull wing surface mount option applies to through hole parts only.
Schematic
6N137, HCPL-2601/2611
HCPL-0600/0601/0611
IF
HCNW137, HCNW2601/2611
2+
ICC
IO
8 VCC
6 VO
VF
–
3
SHIELD
IE 7
VE
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED (SEE NOTE 5).
GND
5
1 IF1
+
VF1
–
2
3
–
VF2
+
4 IF2
HCPL-2630/2631/4661
HCPL-0630/0631/0661
SHIELD
SHIELD
ICC 8 VCC
IO1 7 VO1
IO2 6 VO2
GND
5