STK11C88-SF45I 查看數據表（PDF） - Unspecified
零件编号
产品描述 (功能)
生产厂家
STK11C88-SF45I Datasheet PDF : 15 Pages
| |||
STK11C88
Maximum Ratings
Exceeding maximum ratings may shorten the useful life of the
device. These user guidelines are not tested.
Storage Temperature ................................. –65°C to +150°C
Temperature under bias .............................. –55°C to +125°C
Supply Voltage on VCC Relative to GND.......... –0.5V to 7.0V
Voltage on Input Relative to Vss ............–0.6V to VCC + 0.5V
Voltage on DQ0-7 ...................................–0.5V to Vcc + 0.5V
Power Dissipation ......................................................... 1.0W
DC Output Current (1 output at a time, 1s duration).... 15 mA
Operating Range
Range
Commercial
Industrial
Ambient Temperature
0°C to +70°C
-40°C to +85°C
VCC
4.5V to 5.5V
4.5V to 5.5V
DC Electrical Characteristics
Over the operating range (VCC = 4.5V to 5.5V)
Parameter
Description
Test Conditions
ICC1
ICC2
ICC3
ISB1[3]
Average VCC Current tRC = 25 ns
tRC = 45 ns
Dependent on output loading and cycle rate.
Values obtained without output loads.
IOUT = 0 mA.
Commercial
Industrial
Average VCC Current All Inputs Do Not Care, VCC = Max
during STORE
Average current for duration tSTORE
Average VCC Current WE > (VCC – 0.2V). All other inputs cycling.
at tRC= 200 ns, 5V, Dependent on output loading and cycle rate. Values obtained
25°C Typical
without output loads.
Average VCC Current tRC=25ns, CE > VIH
(Standby, Cycling tRC=45ns, CE > VIH
TTL Input Levels)
Commercial
Industrial
ISB2[3]
IIX
IOZ
VIH
VCC Standby Current CE > (VCC – 0.2V). All others VIN < 0.2V or > (VCC – 0.2V).
(Standby, Stable
CMOS Input Levels)
Input Leakage
Current
VCC = Max, VSS < VIN < VCC
Off State Output
Leakage Current
VCC = Max, VSS < VIN < VCC, CE or OE > VIH or WE < VIL
Input HIGH Voltage
VIL
Input LOW Voltage
VOH
Output HIGH Voltage IOUT = –4 mA
VOL
Output LOW Voltage IOUT = 8 mA
Data Retention and Endurance
Parameter
DATAR
NVC
Description
Data Retention
Nonvolatile STORE Operations
Min
100
1,000
Min Max Unit
97 mA
70 mA
100 mA
70 mA
3 mA
10 mA
30 mA
22
31 mA
23
750 μA
-1
+1 μA
-5
+5 μA
2.2 VCC + V
0.5
VSS – 0.8 V
0.5
2.4
V
0.4 V
Unit
Years
K
Note
3. CE > VIH will not produce standby current levels until any nonvolatile cycle in progress has timed out.
Document Number: 001-50591 Rev. **
Page 6 of 15
[+] Feedback
Share Link: 