LB11923V-TLM-E 查看數據表（PDF） - ON Semiconductor
零件编号
产品描述 (功能)
生产厂家
LB11923V-TLM-E Datasheet PDF : 23 Pages
| |||
LB11923V
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Symbol
Parameter
Conditions
Ratings
Unit
VCC max
IREG max
IO max
Pd max1
Pd max2
Maximum Supply Voltage
Maximum Input Current
Output Current
Allowable Power Dissipation 1
Allowable Power Dissipation 2
VREG pin
UH, VH, WH, UL, VL, and WL outputs
Independent IC
When mounted on the specified PCB
(Note 1)
8
V
2
mA
30
mA
0.62
W
1.79
W
Topr
Operating Temperature
−20 to +80
°C
Tstg
Storage Temperature
−55 to +150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Specified PCB: 114.3 × 76.1 × 1.6 mm glass epoxy PCB
ALLOWABLE OPERATING RANGES (TA = 25°C)
Symbol
Parameter
Conditions
Ratings
Unit
VCC
Supply Voltage
4.4 to 7.0
V
IREG
Input Current Range
VREG pin (7 V)
0.2 to 1.5
mA
VFGS
FG Schmitt Output Applied Voltage
0 to 7
V
IFGS
FG Schmitt Output Current
0 to 5
mA
VLD
Lock Detection Applied Voltage
0 to 7
V
ILD
Lock Detection Output Current
0 to 20
mA
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
ELECTRICAL CHARACTERISTICS (TA = 25°C, VCC = 6.3 V)
Symbol
Parameter
Conditions
ICC1
Supply Current
ICC2
In stop mode
ICC3
VCC = 5 V
ICC4
VCC = 5 V, In stop mode
VO sat1−1 Output Saturation Voltage 1−1
At low level: IO = 400 mA
VO sat1−2 Output Saturation Voltage 1−2
At low level: IO = 10 mA
VO sat2
Output Saturation Voltage 2
At high level: IO = –20 mA
[Hall Amplifier]
IHB(HA)
VICM1
Input Bias Current
Common-mode Input Voltage Range 1
When Hall-effect sensors are
used
VICM2
Common-mode Input Voltage Range 2
When one-side biased inputs
are used (Hall-effect IC
applications)
Hall Input Sensitivity
Sine wave
DVIN(HA)
Hysteresis
Min
Typ
Max
Unit
−
21
29.5
mA
−
2.3
3.3
mA
−
20
28
mA
−
2.1
2.9
mA
−
0.1
0.3
V
−
0.8
1.2
V
VCC – 1.2 VCC – 0.9
−
V
–2
–0.1
−
mA
0.5
−
VCC – 2.0
V
0
−
VCC
V
100
−
25
35
−
mVp−p
52
mV
www.onsemi.com
2
Share Link: 