HSMX-C120 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
HSMX-C120 Datasheet PDF : 10 Pages
| |||
END
START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
Figure 17. Tape leader and trailer dimensions.
Convective IR Reflow Soldering
For more information on IR reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components.
Storage Condition: 5 to 30°C @ 60% RH max.
Baking is required under the condition:
a) Humidity Indicator Card is >10% when read at 23 ± 5°C
b) Device exposed to factory conditions <30°C/60% RH more than 672 hours.
Baking recommended condition: 60 ± 5°C for 20 hours.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes AV01-0520EN
AV02-0975EN - May 5, 2010
Share Link: 