HJ2-AC120V 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
生产厂家
HJ2-AC120V Datasheet PDF : 8 Pages
| |||
HJ
2. Specifications
Characteristics
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Item
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity Au plating type
(Reference value)*1
Without Au plating type
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Between open contacts
Between contact sets
Between contact and coil
Temperature rise (coil) (at 70°C 158°F)
Operate time*2
Release time*2
Shock resistance
Vibration resistance
Mechanical
Functional
Destructive
Functional
Destructive
Electrical (resistive load) (at 20 times/min.)
Conditions for operation, transport and storage*3
(Not freezing and condensing at low temperature)
Max. Operating speed
Specifications
2 Form C
4 Form C
Max. 50 mΩ (By voltage drop 6 V DC 1A)
Au plating type: Au plating Ag Without Au plating type: Ag
7 A 250V AC
5 A 250V AC
1,750 VA
1,250 VA
250V AC, 125V DC
7A
5A
0.9W 1.2 VA
1mA 1V DC
1mA 5V DC
Min. 100MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
Max. 60°C 140°F (By resistive method, nominal coil voltage)
Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 20ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.0 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 1.0 mm
Min. 2×107 (at 180 times/min.)
Min. 105 (7A 250V AC)
Min. 5×105 (5A 250V AC)
Min. 105 (5A 250V AC)
Min. 2×105 (3A 250V AC)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min. (at nominal switching capacity)
Approx. 34g 1.20 oz
Notes: In accordance with the Electrical Appliance and Material Safety Law, you cannot exceed a voltage of 150V AC when using the 4 Form C type.
For more information, please inquire.
When using low level loads, contact instability may result depending on conditions of use (switching frequency and ambient conditions, etc.); therefore, please use
the Au plating type.
*1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. For the AC coil types, the operate/release time will differ depending on the phase.
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
1-(1). Max. switching capacity (2 Form C type)
1-(2). Max. switching capacity (4 Form C type)
2-(1). Life curve (2 Form C)
AC resistive load
With test button type only
10
7
5
AC resistive
load
1
DC inductive load
0.5 L/R=7ms
DC resistive load
AC inductive load
0.1
cos φ =0.4
10
50 100 125 250
Contact voltage, V
5
3
AC resistive
1
load
0.5 DC resistive load
DC inductive load
L/R=7ms
0.1
AC inductive load
cos φ =0.4
10
50 100 125 250
Contact voltage, V
500
AC 250V (cosφ =1)
100
50
AC 250V (cosφ =0.4)
10
01234567
Load current, A
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
ASCTB6E 201201-T
Share Link: 