A6850
Dual Channel Switch Interface IC
ELECTRICAL CHARACTERISTICS at TJ = -40 to +150°C (unless noted otherwise)
Characteristics
Symbol
Test Conditions
Min. Typ. Max. Units
Supply Input Voltage Range
Supply Input Quiescent Current
Power-Up Time1
VIN
Operating mode, IOUTPUTx = 0 mA
IINQ
Sleep mode:
ENABLE1 and ENABLE2 low
VOUTPUT1 = VOUTPUT2 = 0 V
tON
4.75 –
26.5
V
–
–
5.0
mA
–
–
15
μA
–
–
20
μs
Output Rise Time2
trLH
IOUTPUTx = 0 to –10 mA,
10% to 90%VSENSEx
– 0.18 1.5
μs
Output Fall Time2
tfHL
IOUTPUTx = 0 to –10 mA,
90% to 10%VSENSEx
–
1.4
3.5
μs
Enable Delay Time2
tENdlyLH
IOUTPUTx = –5 mA,
50% ENABLEx to 50%VSENSEx
–
150 500
ns
Disable Delay Time2
OUTPUTx Source Resistance
OUTPUTx Leakage Current
SENSEx Output Current Offset3
SENSEx Voltage4
ENABLEx Input Voltage Range
ENABLEx Input Hysteresis
ENABLEx Current
tENdlyHL
IOUTPUTx = –5 mA,
50% ENABLEx to 50%VSENSEx
–
4.0
7.5
μs
RDS(on)
IOUTPUTx = –20 mA
–
–
35
Ω
IOUTPUTQ VOUTPUTx = 0 V; disabled
–
–
–20
μA
ISENSE(ofs)
ISENSEx = (IOUTPUTx / 10) + ISENSE(ofs),
IOUTPUT = –2 mA to –20 mA
–100
–
100
μA
ISENSEQ VSENSEx = 0 V; disabled
–
–
10
μA
VSENSEx
VIN > 7 V
VIN < 7 V
0
–
6
V
0
– VIN – 1
V
VENABLEH
2.0
–
–
V
VENABLEL
–
–
0.4
V
VENABLEhys At least one output enabled
125
–
375
mV
IENABLE
ENABLEx = 2.0 V
ENABLEx = 0.4 V
–
40
100
μA
–
8.0
20
μA
OUTPUT Current Limit
IOUTPUTM
–25.0 –35.0 –45.0 mA
OUTPUT Reverse Bias Current
IOUTPUT(rvrs)
Reverse bias blocking: VIN = 4.75 V,
VOUTPUT = 26.5 V
–
500 750
μA
Overvoltage Protection Threshold
VOVP
Rising VIN
27.0 –
33.0
V
Overvoltage Protection Hysteresis VOVPhys
–
2.0
–
V
Thermal Shutdown Threshold
TTSD
Temperature Increasing
–
175
–
°C
Thermal Shutdown Hysteresis
TTSDhys
–
15
–
°C
1Delay from end of Sleep mode to outputs enabled.
2 RSENSEx = 1.5 kΩ.
3For input and output current specifications, negative current is defined as coming out of (sourced from) the specified device pin.
4User to ensure that VSENSEx remains within the specified range. If VSENSEx exceeds the maximum value, the device is self-protected by an
internal clamp, but not all parameters perform as specified.
Allegro MicroSystems, Inc.
3
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com