MB88345 查看數據表（PDF） - Fujitsu
零件编号
产品描述 (功能)
生产厂家
MB88345 Datasheet PDF : 14 Pages
| |||
MB88345
s ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Conditions
Rating
Unit
Min.
Max.
Power supply voltage
Input voltage
VCC
VDD Based on GND
VIN
Ta = +25 °C
−0.3
−0.3*
−0.3
+7.0
V
+7.0*
V
VCC + 0.3
V
Output voltage
VOUT
−0.3
VCC + 0.3
V
Power consumption
PD
250
mW
Operating temperature
Ta
−20
+85
°C
Storage temperature
Tstg
−55
+150
°C
* : VCC ≥ VDD
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Conditions
Value
Unit
VCC
Power supply voltage 1
GND
5 V ± 10 %
V
0
V
Power supply voltage 2
VDD
VDD − VSS ≥ 2.0 V
VSS
2.0 to VCC
V
GND to VCC − 2.0
V
Analog output source current
IAL
max. 1.0
mA
Analog output sink current
IAH
max. 1.0
mA
Oscillation limit output capacity COL
Digital data value range
Operating temperature
Ta
max. 1.0
µF
#00 to #FF
−20 to +85
°C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
6
Share Link: 