NDY0505C(2018) 查看數據表（PDF） - Murata Power Solutions
零件编号
产品描述 (功能)
生产厂家
NDY0505C Datasheet PDF : 5 Pages
| |||
APPLICATION NOTES
Recommended input & output capacitors
NDY Series
Isolated 3W Wide Input DC-DC Converters
Although these converters will work without external capacitors, they are necessary in order to guarantee the full parametric performance over the full line and load
range. All parts have been tested and characterized using the following values and test circuit.
Input Voltage
5V, 12V
24V, 48V
CIN
100μF, 25V (0.25Ω at 100KHz)
10μF, 100V (1.5Ω at 100KHz)
Output Voltage
3.3V
5V, 12V, 15V
COUT
100μF, 25V (0.25Ω at 100KHz)
LOUT
MPS# - 24100C
Not required
Test circuit, 5V, 12V and 15V output
+ VIN
+V
OUT
CIN
-V
IN
Recommended circuit for reduced ripple 3.3V output
+ VIN
NDY
LOUT
COUT
-V
OUT
+V
OUT
CIN
NDY
COUT
-V
IN
-V
OUT
Output load
The minimum rated load across the whole input voltage range is 25% of the full load output. It is important to take care that the load does not fall below this as the output ripple
will greatly increase. While this condition will not harm the device the resultant increase in output ripple could cause customers’ application to malfunction.
NDY05 POWER DERATING CURVE
5
4
3
2
1
0
4.5 5
67
89
Input voltage (V)
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering
systems with a peak wave solder temperature of
300ºC for 10 seconds. The pin termination finish
on this product series is Bright Tin. The series
is backward compatible with Sn/Pb soldering
systems.
For further information, please visit www.murata-ps.com/rohs
www.murata-ps.com/support
KDC_NDY.I01 Page 4 of 5
Share Link: 