Absolute Maximum Ratings:
Temperature Under Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +70°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Voltage On Any Pin With Respect to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3V to +7V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8W
Note 1. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only functional operation of the device at these
or any other condition above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may
affect device reliability.
DC Characteristics: (TA = 0° to 70°C, VCC = 5V ±5% unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Clock Input Low Voltage
Clock Input High Voltage
Input Low Voltage
Input High Voltage
VILC
VIHC
VIL
VIH
–0.3 – 0.45 V
VCC–0.6 – VCC+3 V
–0.3 – 0.8 V
2.0
– VCC V
Output Low Voltage
Output High Voltage
Power Supply Current
Input Leakage Current
Tri–State Output Leakage Current in Float
Tri–State Output Leakage Current in Float
Darlington Drive Current
VOL IOL = 2mA
–
– 0.4 V
VOH IOH = –250µA
2.4
–
–
V
ICC TC = 250ns
–
– 120 mA
IL1 VIN = 0 to VCC
–
–
10 µA
ILOH VOUT = 2.4 to VCC
–
–
10 µA
ILOL VOUT = 0.4V
–
– –10 µA
IOHD VOH = 1.5V, REXT = 390Ω –1.5
–
– mA
Capacitance: (TA = +25°C, f = 1MHz unless otherwise specified)
Parameter
Symbol
Test Conditions
Clock Capacitance
Input Capacitance
Output Capacitance
Cφ
CIN
COUT
Unmeasured Pins
Returned to GND
Min Typ Max Unit
– – 20 pF
––
5 pF
– – 10 pF
AC Characteristics: (TA = 0° to 70°C, VCC = 5V ±5% unless otherwise specified)
Parameter
Symbol
Test Conditions Min Typ Max Unit
Clock Cycle Time
TcC
400 – Note 2 ns
Clock Width (High)
TwCH
170 – 2000 ns
Clock Width (Low)
TwCL
170 – 2000 ns
Clock Fall Time
TfC
– – 30 ns
Clock Rise Time
TrC
– – 30 ns
All Hold Times
Th
0–
– ns
CS to Clock ↑ Setup Time
TsCS(C)
250 –
– ns
CE to Clock ↑ Setup Time
TsCE(C)
200 –
– ns
IORQ ↓ to Clock ↑ Setup Time
TsIO(C)
250 –
– ns
RD to Clock ↑ Setup Time
TsRD(C)
240 –
– ns
Note 2. TcC = TwCH + TwCL + TcC + TrC.