NTE1834 查看數據表（PDF） - NTE Electronics
零件编号
产品描述 (功能)
生产厂家
NTE1834 Datasheet PDF : 3 Pages
| |||
Electrical Characteristics: (TA = +25°C, VCC = 12V unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Supply Current
Input Low Level Voltage
(Pin4, Pin5, and Pin6)
ICC RL = ∞, Pin4, Pin5, and Pin6 = “L” Level
VIL
– 12 24 mA
– – 1.0 V
Input High Level Voltage
VIH
(Pin4, Pin5, and Pin6)
4.0 – – V
Output Low Level Voltage
(Pin4, Pin5, and Pin10)
VOL Pin8 = Open, IO = 500mA
– 0.8 1.5 V
Output High Level Voltage
(Pin4, Pin5, and Pin10)
VOH Pin8 = Open, IO = 500mA
10 10.5 – V
Output Leakage Current
IOL RL = ∞, Pin4, Pin5, and Pin6 = “L” Level,
Current flowing to Pin9
– – 1 mA
Voltage Stability
(Pin2)
(Pin3)
(Pin10)
Drain Current
(Pin2)
(Pin3)
(Pin10)
Backlash Current
∆V2
∆V3
∆V10
VR = 6V with respect
to Pin8
IO(2) = 500mA
IO(3) = 500mA
IO(10) = 500mA
–0.5 – 0.5 V
–0.5 – 0.5 V
–0.5 – 0.5 V
I8 (2) VR = 6V, IO(2) = 500mA, Pin2 = “H” Level –0.5 – 0.5 V
I8 (3) VR = 6V, IO(3) = 500mA, Pin3 = “H” Level –0.5 – 0.5 V
I8 (10) VR = 6V, IO(10) = 500mA, Pin10 = “H” Level –0.5 – 0.5 V
IB Sink current at Pin9 when Pin4, Pin5, and Pin6 – – 0.3 A
are low and one output pin is at –1V
Thermal Shut–Down Operate TON
Temperature
– 150 – °C
Thermal Shut–Down Release TOFF
Temperature
– 100 – °C
Input/Output Truth Table:
Input
Output
Pin4 Pin5 Pin6 Pin10 Pin2 Pin3
L
L
X
L
L
L
H
L
L
H
L OPEN
H
L
H
L
H OPEN
L
H
L
H OPEN L
L
H
H
L OPEN H
H
H
X
L
L
L
X = Don’t Care
Function
Brake
Current flows from Pin10 to Pin2
Current flows from Pin2 to Pin10
Current flows from Pin10 to Pin3
Current flows from Pin3 to Pin10
Brake
Precautions:
1. While the control input pins of the NTE1834 can be directly connected to MOS logic outputs, it is
recommended that you insert a series protection resistor in the range 1kΩ to 10kΩ between the
devices.
2. To improve reliability, be sure to temporarily put the device in brake mode before reversing the
direction of rotation of the motor. A brake mode duration of more than 10µs is recommended.
3. The recommended power on sequence is one in which VCC1 (Pin7) is the first turned on and the
last turned off.
Share Link: 