MPC5200VR400B(2006) 查看數據表（PDF） - Freescale Semiconductor

零件编号

产品描述 (功能)

生产厂家

MPC5200VR400B
(Rev.:2006)

SDRAM/DDR Memory Controller

Freescale Semiconductor 

Features

• 6 Programmable Serial Controllers (PSC), configurable for the following:

— UART or RS232 interface

— CODEC interface for Soft Modem, Master/Slave CODEC Mode, I2S and AC97

— Full duplex SPI mode

— IrDA mode from 2400 bps to 4 Mbps

• Fast Ethernet Controller (FEC)

— Supports 100Mbps IEEE 802.3 MII, 10 Mbps IEEE 802.3 MII, 10 Mbps 7-wire interface

• Universal Serial Bus Controller (USB)

— USB Revision 1.1 Host

— Open Host Controller Interface (OHCI)

— Integrated USB Hub, with two ports.

• Two Inter-Integrated Circuit Interfaces (I2C)

• Serial Peripheral Interface (SPI)

• Dual CAN 2.0 A/B Controller (MSCAN)

— Motorola Scalable Controller Area Network (MSCAN) architecture

— Implementation of version 2.0A/B CAN protocol

— Standard and extended data frames

• J1850 Byte Data Link Controller (BDLC)

— J1850 Class B data communication network interface compatible and ISO compatible for low

speed (<125 kbps) serial data communications in automotive applications.

— Supports 4X mode, 41.6 kbps

— In-frame response (IFR) types 0, 1, 2, and 3 supported

• Systems level features

— Interrupt Controller supports four external interrupt request lines and 47 internal interrupt

sources

— GPIO/Timer functions

– Up to 56 total GPIO pins (depending on functional multiplexing selections) that support a

variety of interrupt/WakeUp capabilities.

– Eight GPIO pins with timer capability supporting input capture, output compare, and pulse

width modulation (PWM) functions

— Real-time Clock with one-second resolution

— Systems Protection (watch dog timer, bus monitor)

— Individual control of functional block clock sources

— Power management: Nap, Doze, Sleep, Deep Sleep modes

— Support of WakeUp from low power modes by different sources (GPIO, RTC, CAN)

MPC5200B Data Sheet, Rev. 1

Freescale Semiconductor

3

Share Link: