UWR-12/665-D5A-C 查看數據表（PDF） - Unspecified
零件编号
产品描述 (功能)
生产厂家
UWR-12/665-D5A-C Datasheet PDF : 6 Pages
| |||
www.murata-ps.com
UWR Series
Single Output, High Reliability, 2" x 1", 6-10 Watt, DC-DC Converters
FEATURES
Low Cost! Highly reliable!
Proven SMT-on-pcb construction
Designed to meet UL/EN/IEC 60950-1,
CAN/CSA-C22.2 60950-1
Qual tested; HALT tested; EMC tested
Small packages, 2" x 1" x 0.375"
Standard pinouts
5, 5.2, 12 or 15 Volt outputs
Choice of 3 wide-range inputs:
4.7-7.25 Volts
9-18 Volts
18-75 Volts
Fully isolated, 1500Vdc guaranteed
–40 to +100°C operation
5-side metal shielded cases with non-
conductive baseplates
Modifications and customs for OEMs
PRODUCT OVERVIEW
Placing reliability and cost considerations above
all others, Murata Power Solutions' new A-Series DC/
DC Converters combine straightforward circuit topolo-
gies, the newest components, proven SMT-on-pcb
construction, and highly repeatable automatic assem-
bly techniques. Considering the critical low-cost and
long-term-reliability requirements of today’s telecom,
datacom and computer/networking applications, the
A-Series may well be the most cost-effective DC/DC’s
available today.
The single-output, 6-10 Watt Models of the
A-Series deliver both high power densities and
impressive MTBF’s. Their superior durability is
substantiated by a rigorous in-house qualification pro-
gram including HALT (Highly Accelerated Life Testing).
The goal of HALT is not to simulate field conditions but
to expose devices to multiple excessive stresses with
the intention of precipitating any potential electrical,
mechanical or process weaknesses.
Packaged in 2" x 1" x 0.375" shielded metal
cases with non-conductive coatings, these fully
isolated (1500Vdc guaranteed) DC/DC’s offer excellent
line/load regulation, full I/O protection, and industry-
standard pinouts.
Output voltages include 5, 5.2, 12 and 15 Volts.
Input voltage ranges are either 4.7-7.25V ("D5A"
models), 9-18V ("D12A" models) or 18-75V ("D48A"
models). All A-Series UWR models are fully EMI char-
acterized and agency safety approved.
A-Series DC/DC’s are extremely reliable, easy-
to-use, cost-effective power converters. Use them
to improve the reliability of existing equipment or to
develop new systems that exceed design objectives.
+VIN
(1)
–VIN
(2)
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
+VOUT
(3)
COMMON
(5)
Typical topology is shown
PWM
CONTROLLER
OPTO
ISOLATION
Figure 1. Simplified Schematic
REFERENCE &
ERROR AMP
MDC_UWR6-10W Series.E01 Page 1 of 6
Share Link: 