AA3528SGS 查看數據表（PDF） - Kingbright

零件编号

产品描述 (功能)

生产厂家

AA3528SGS

3.5x2.8mm SURFACE MOUNT LED LAMP

Kingbright 

Handling Precautions

Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic

significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.

As a result, special handling precautions need to be observed during assembly using silicone encapsulated

LED products. Failure to comply might lead to damage and premature failure of the LED.

1. Handle the component along the side surfaces by using forceps or appropriate tools.

2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.

3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or

damage the internal circuitry.

4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.

4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.

4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup

and avoid damage during production.

5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of

leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

All design applications should refer to Kingbright application notes available at

http://www.KingbrightUSA.com/ApplicationNotes

SPEC NO: DSAL0871

APPROVED: WYNEC

REV NO: V.4B

CHECKED: Allen Liu

DATE: AUG/31/2012

DRAWN: D.M.Su

PAGE: 2 OF 6

ERP: 1201006766

Share Link: