OPB983N51Z 查看數據表（PDF） - TT Electronics.
零件编号
产品描述 (功能)
生产厂家
OPB983N51Z Datasheet PDF : 6 Pages
| |||
Input Diode (See OP140 / OP240 LED for additional information)
VF Forward Voltage
-
- 1.70 V
IR Reverse Current
-
- 100 µA
Coupled (See OPL560 Detector for additional information)
VCC Operating D.C. Supply Voltage
4.5 - 16 V
ICC Supply Current
-
- 12 mA
Low Level Output Voltage:
Buffer Totem-Pole OPB960,OPB970
OPB980,OPB990
Buffer Open-Collector OPB961,OPB971
VOL
OPB981,OPB991
-
- 0.4 V
Inverter Totem-Pole OPB962,OPB972
OPB982,OPB992
Inverter Open-Collector OPB963,OPB973
OPB983,OPB993
High Level Output Voltage:
Buffer Totem-Pole OPB960,OPB970
VOH
OPB980,OPB990 VCC -2.1 -
-
V
Inverter Totem-Pole OPB962,OPB972
OPB982,OPB992
High Level Output Current:
Buffer Open-Collector OPB961,OPB971
IOH
OPB981,OPB991
-
Inverter Open-Collector OPB963,OPB973
OPB981,OPB991
- 100 µA
IF(+) LED Positive-Going Threshold Current(16)
-
- 15 mA
IF(+) / IF(-) Hysteresis Ratio
- 1.5 -
-
tR, tF Output Rise Time, Output Fall Time
-
70 -
ns
tPLH, tPHL
Propagation Delay Time
Low to High, High to Low
- 5.0 - µs
Notes:
14) Normal application would be with light source blocked, simulated by IF = 0 mA.
15) All parameters are tested using pulse techniques.
16) An increasing current applied to the LED which causes the output logic state to change.
For proper application IF(+), LED current, should be more than the stated maximum.
IF = 20 mA, TA = 25° C
VR = 2.0 V, TA = 25° C
VCC = 4.5V to 16V
VCC = 4.5V, IOL = 12.8mA
IF = 0 mA (14)
VCC = 4.5V, IOL = 12.8mA
IF = 15 mA
VCC = 4.5V to 16V, IOH = 800µA
IF = 15 mA
VCC = 4.5V to 16V, IOH = 800µA
IF = 0 mA (14)
VCC = 4.5V to 16V, VOH = 30V
IF = 15 mA
VCC = 4.5V to 16V, VOH = 30V
IF = 0 mA (14)
VCC = 5.0V, TA = 25° C
VCC = 5.0V
VCC = 5.0V, IF peak= 15 mA, TA = 25° C
100 kHz square wave, C = 10pF max.
RL = 360 Ω to GND (Totem-Pole)
RL = 1KΩ pull-up (Open-Collector)
Share Link: 