NCL30082
Table 2. MAXIMUM RATINGS TABLE
Symbol
Rating
Value
Unit
VCC(MAX)
ICC(MAX)
VDRV(MAX)
IDRV(MAX)
VMAX
IMAX
VZCD(MAX)
IZCD(MAX)
VDIM(MAX)
RθJ−A
TJ(MAX)
Maximum Power Supply voltage, VCC pin, continuous voltage
Maximum current for VCC pin
Maximum driver pin voltage, DRV pin, continuous voltage
Maximum current for DRV pin
Maximum voltage on low power pins (except pins ZCD, DIM, DRV and VCC)
Current range for low power pins (except pins ZCD, DRV and VCC)
Maximum voltage for ZCD pin
Maximum current for ZCD pin
Maximum voltage for DIM pin
Thermal Resistance, Junction−to−Air
Maximum Junction Temperature
Operating Temperature Range
−0.3, +35
Internally limited
−0.3, VDRV (Note 1)
−500, +800
−0.3, +5.5
−2, +5
−0.3, +10
−2, +5
−0.3, +10
289
150
−40 to +125
V
mA
V
mA
V
mA
V
mA
V
°C/W
°C
°C
Storage Temperature Range
−60 to +150
°C
ESD Capability, HBM model (Note 2)
4
kV
ESD Capability, MM model (Note 2)
200
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. VDRV is the DRV clamp voltage VDRV(high) when VCC is higher than VDRV(high). VDRV is VCC unless otherwise noted.
2. This device series contains ESD protection and exceeds the following tests: Human Body Model 4000 V per Mil−Std−883, Method 3015.
3. This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78 except for VIN pin which passes 60 mA.
http://onsemi.com
4