SDP4-24-100LT 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

SDP4-24-100LT

Power Supplies

Unspecified 

3

Power Supplies

SDP™ Series Specifications (Other Voltages)

Description

Input Voltage 1

Input Frequency

Input Current

External Fusing

Hold-Up Time

Efficiency

Losses

Output Voltage

Voltage Regulation

Ripple/Noise 2

Overvoltage Protection (OVP)

Output Noise Suppression

Rated Continuous Loading

Overload Behavior

Protection

Power Back Immunity

Status Indicators

Case & Mounting

(H x W x D) (in/mm)

Weight - lbs (kg)

Mounting Orientation

Ventilation/Cooling

•Free space for cooling

Connection

•Connector size range

Temperature

MTBF

Humidity  

Electromagnetic Emissions

(EMC)

Electromagnetic Immunity

(EMI)

Safe Low Voltage

Protection Class/Voltage

Warranty

Catalog Number

SDP 5-5-100T

SDP 2-12-100T

SDP 3-15-100T

SDP 1-48-100T

Input

85-264 Vac, 90-375 Vdc

47 - 63 Hz

0.6 A @ 102 Vac;

0.33 A @196 Vac

1.0 A @ 102 Vac;

0.6 A @ 196 Vac

<1.0 A @ 100 Vac;

<0.6 A @ 196 Vac

Not required. Unit provides internal fuse (T3A, not accessible)

> 25 ms

> 80% typ.

> 86% typ.

> 90% typ.

7.5 W typ.

8.1 W typ.

< 8.1 W typ.

Output

5 - 5.5 Vdc (5 - 6 min adj.)

12 Vdc (9.9 - 12.1 min adj. ) 15 Vdc (11.9 - 15.1 min adj.)

48 Vdc (48 - 56 min adj.)

< 2% Dynamic; < 0.5% Static

< 50 mVpp

> 6.7 Vdc

> 18 Vdc

> 20 Vdc

> 56 Vdc

Radiated EMI values below EN61000-6-2

lout = 5A @ Vout = 5.1V

3A @ 10 Vdc

2.5A @12 Vdc

4.2A @ 12 Vdc

3.4A @ 15 Vdc

Up to 1.05A @ 48 V

0.9A @ 56 V

Continuous operation at overload/short-circuit: up to 1.5 x Nominal Current Continuous

Unit is continuously protected against short-circuit, overload and open-circuit.

10 V

22 V

80 V

Installation

Green LED on, when Vout “OK”.

Molded plastic housing using UL 94 approved flameproof material rating 94V-2.

Simple snap-on to DIN TS35/7.5 or TS35/15 rail system.

Dimensions

2.95 x 1.77 x 3.58 (75.0 x 45.0 x 91.0)

0.5 lbs (.23 kg)

Standard: Vertical; Optional: Horizontal or On Top (Contact Technical Services).

Normal convection, no fan required; Above/below: 25 mm recommended.

Input: screw terminals, connector size range: 20-12 AWG (1.5 - 6 mm2) for solid or stranded conductors.

General

Storage: -25°C to +85°C Operation: -10°C to +60°C full power with linear derating to half power from +60°C to +70°C.

(Convection cooling, no forced air required).

> 500,000 hours according to Telcordia/Bellcore Document SR-332, Issue 1.

Up to 90% RH, noncondensing; IEC 68-2-2, 68-2-3

EN61000-6-3 (Includes EN61000-6-4) Class B (EN 55022) incl. Annex A

EN61000-6-2 (Includes EN61000-6-1) (EN55024) Criterion A: no degradation of performance

SELV (acc. EN60950)

IP20 (IEC529), Protection Class 1 (IEC536)

3 year limited warranty

Notes:

1. Not UL listed for DC input.

2. Ripple/noise is stated as typical values when measured with a 20 MHz, bandwidth scope and 50 Ohm resistor.

136

Contact Technical Services at (800) 377-4384 with any questions.

Visit our website at www.solahd.com.

Share Link: