xPico Wi-Fi SMT
Embedded Wireless
Device Server
Features and Specifications
Wireless LAN Interface
• IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface
(2.4 GHz only)
• IEEE 802.11 d/h/i/j/k/w/r
• u.FL connector and RF pads for optional external atenna
(XPCW1002100B)
Serial Interface
• Two Serial CMOS Ports (3.3V, 5V tolerant)
• 300 to 921.6 Kbps
• Flow control XON/XOFF, RTS/CTS
• Lantronix tunneling application
Host Interface
• Dual Serial Port, SPI, USB 2.0* (device)
• 8 GPIO
Network Protocols
• TCP/IP, UDP/IP*, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS
Networking Capabilities
• Soft Access Point with DHCP Server
• QuickConnect: Dynamic Profiles facilitate easy and rapid
connections to access points
Management and Control
• Web Server - Landing Page
• CLI (Serial Monitor Port)
• XML import and Export (XCR)
• Field upgradable firmware (OTA)
Security
• IEEE 802.11i Support – WPA-Personal, WPA2-Personal
• 256-bit AES Encryption*
Architecture
• ARM Cortex M3 class processor with on-chip Flash and SRAM
• 1MB Flash and 128 KB SRAM
• 1MB SPI Flash storage
Power
• Input Voltage: 3.3VDC
• Low power consumption of approximately 6μA standby
Physical Interface
• 56-Pad SMT Castellation
Environmental
• Operating Temperature: –40° to +85° C
• Storage Temperature : –40° to +85° C
• Relative Humidity: 0% to 90% non-condensing
Certifications
• FCC Class B, UL and EN EMC
Packaging
• Dimensions:
-- XPCW1002100: 26.1mm (L) x 18.3mm (W) x 3.0mm (H)
*Software support for these features available in a future software release.
Please contact sales representatives for more information.
-- XPCW1003100: 30.1mm (L) x 18.3mm (W) x 3.0mm (H)
• Weight: 2.5g
Warranty
• 5-Year Limited
Tablet & Smartphone enable devices
xPico WiFi SMT provides simultaneous Soft AP and Client mode, allowing for easy
points of access while maintaining a secure network without the need for special
clients.
Other members of the xPico product family:
xPico
xPico IAP
A chip-sized networking solution that
A chip-sized networking solution that
enables Ethernet connectivity on
enables Ethernet connectivity on devices
virtually any device.
for industrial and automation applications
that require MODBUS support.
Part Number Description
XPCW1002100B
xPico Wi-Fi W1002— IEEE 802.11 b/g/n
Device Server Module, Extended Temp, SMT,
Bulk, RoHS
XPCW1003100B
xPico Wi-Fi W1003— IEEE 802.11 b/g/n
Device Server Module, Extended Temp, w/
On-Module Antenna SMT, Bulk, RoHS
XPCW1003100S
xPico Wi-Fi W1003— IEEE 802.11 b/g/n
Device Server Module, Extended Temp, SMT,
Sample, RoHS
XPCW1002100K
EVALUATION KIT with xPico Wi-Fi W1002 Wi-
Fi Module, SMT on Carrier Board, IEEE 802.11
b/g/n, with U.FL and Antenna Sample
XPCW1003100K
EVALUATION KIT with xPico Wi-Fi W1003
Wi-Fi Module, SMT 802.11 b/g/n, On-Module
Antenna
Ordering Information
Americas
800.422.7055
sales@lantronix.com
http://www.lantronix.com
NASDAQ: LTRX
Europe
+31 (0) 76.52.3.6.74 4
EMEA@lantronix.com
Asia/Pacific/Japan
+852 3428.2338
asiapacific_sales@lantronix.com
China: +86.21.6237.8868
Shanghai@lantronix.com
India: +91 994-551-2488
Sales_India@lantronix.com
Indonesia: +91 994-551-2488
sales_indonesia@lantronix.com
Japan: +81.3.3273.8850
Sales_Japan@lantronix.com
©2017 Lantronix, Inc. All rights reserved. Lantronix and xPico are registered trademarks of Lantronix, Inc. in the U.S. and certain other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance. All other trademarks
and trade names are the property of their respective owners. MPB-00018 Rev C