M85049/15S17W 查看數據表（PDF） - Amphenol Aerospace
零件编号
产品描述 (功能)
生产厂家
M85049/15S17W Datasheet PDF : 77 Pages
| |||
Amphenol
Backshells
Materials & Finishes, Assembly Torque Values,
38999
III
HD
Dualok
II
I
SJT
Accessories
Aquacon
Herm/Seal
PCB
Style-2 Configuration
MATERIALS & FINISHES
Amphenol offers adapters in the following standard finishes.
The base material is aluminum alloy.
MATERIAL:
Aluminum parts: As per ASTM B 211, 221, 209, 85, 26
Steel parts:
300 series, as per AMS-QQ-S-763/ASTM A 582
Elastomers:
Fluro Silcon, Silicon
Other parts:
Suitable corrosion resistant material
MIL (QPL) QUALIFICATION
Many Amphenol Backshells are qualified to SAE-AS
85049 standard. (Old standard is MIL-C-85049).
TABLE-2 (PLATING FINISHES)
Amphenol
Designation
A
B
L
M
N
T
U
MIL
Designation
A
N
Anodize, Black*
Finish
Anodize, Hard*
Nickel, Bright
Electroless Nickel
Electroless Nickel
Cadmium, Bright
Cadmium, Olive drab
V
Cadmium, Olive drab over Electroless Nickel
W
W
Cadmium, Olive drab over Electroless Nickel
Y
Zinc-Cobalt, Dark Olive drab
Z
Zinc-Cobalt, Black
For availability of other finishes, email your special
requirements: email: sales@backshellworld.com
Guiding Specifications/Requirements
To meet AS85049 requirements
AMS-A-8625, Type-III, Class-1
AMS-QQ-290, Class-1, Grade-F
AMS-C-26074, Class-4, Grade-B
To meet AS85049 requirements
AMS-QQ-P-416, Type-I, Class-2
AMS-QQ-P-416, Type II, Class 3
AMS-QQ-P-416, Type-II, Class-3 (Cadmium);
AMS-C-26074, Class-4, grade-B (Nickel)
To meet AS85049 requirements
ASTM-B840
ASTM-B840
* Non conductive coatings.
ASSEMBLY TORQUE VALUES
Amphenol recommends the following torque values
for its adapters while assembling them to the
connectors. These values are based on the coupling
thread strength specified in SAE-AS85049 standard.
Connector
Shell Size
8, 9
3, 10, 10SL, 11
7, 12, 12S, 13
14, 14S, 15
16, 16S, 17
18, 19, 27
20, 21, 37
22, 23
24, 25, 61
28
32
36
40
44
48
Torque
(Inch-Pounds)
40
40
40
40
40
40
80
80
80
100
100
100
120
120
120
STYLE-2 CONFIGURATION
Some design consideration will require bigger diameter cable
to be terminated in the smaller shell size connectors. Cable
with heavy/thicker shielding, many wires for different branches/
routing are some of the examples. Such cable termination will
require a bigger adapter body with cable entry dimensions more
than the connector rear side dimensions Amphenol also sup-
ports this kind of application. The coupling end of the adapter
will be modified to Style-2 design as shown in the figure below
in such cases. The overall length of the Style-2 design adapters
would be increased by approx. 1 inch (25.mm) as shown. This
alternative design is applicable for all the Backshell Families
listed in this catalog.
1.00 INCH (MAX.)
25.4 MM (MAX.)
486 For more information on Backshells visit www.backshellworld.com • or email: sales@backshellworld.com
Share Link: 