HIF3-2022SC 查看數據表（PDF） - HIROSE ELECTRIC

零件编号

产品描述 (功能)

生产厂家

HIF3-2022SC

Ribbon Cable connector Compliant with MIL Standard

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Ribbon Cable connector Compliant with MIL Standard

HIF3B Series

■Features

1. Product Compliant with MIL Standard

HIF3B series has been developed as a product compliant with MIL

standard, and used for wide applications.

2. UL Approval Product

HIF3B series connectors are UL approved.

3. Mechanism to Prevent Mis-insertion

This connector is equipped with the mechanism to prevent Mis-

insertion as follows.

1 The system provides the convex area to insert the guide-key on the

pin header side, and to guide it in combination with the socket

convex area (MIL standard).

2 The system embeds and guides the polarizing key in the socket holes.

4. Applicable Cable AWG#28

The applicable cable is UL2651 AWG#28 flat cable (7 cores./

0.127mm, jacket dia. 0.9±0.1mm).

■Product Specifications

Rating

Current rating : 1A

Operating Temperature Range : –55 to +85ç (Note 1) Storage Temperature Range : –10 to +60ç (Note 2)

Voltage rating : 200V AC Operating Moisture Range : 40 to 80%

Storage Humidity Range : 40 to 70% (Note 2)

Item

Specification

1. Insulation Resistance 1000M ohms min.

2. Withstanding voltage No flashover or insulation breakdown.

3. Contact Resistance 15m ohms max.

4. Vibration

No electrical discontinuity of 1μs or more

5. Humidity (Steady state) Insulation resistance: 1000M ohms min.

6. Temperature Cycle No damage, cracks, or parts looseness.

7. Durability (Mating/un-mating) Contact resistance: 15m ohms max.

8. Resistance to Soldering heat No deformation of components affecting performance.

Condition

500V DC

650V AC/1 minute

0.1A

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

96 hours at temperature of 40ç and humidity of 90% to 95%

(-55ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.

125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles

500 cycles

Solder bath: 260ç for 10 seconds

Manual soldering: 360ç for 5 seconds

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a

specific part number shown.

Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.

■Material

Part

Insulator

Socket Contact

Pin header contact

Material

PBT

Beryllium copper

Brass

Finish

Black

Connection area

Gold plated

Selective Gold plated

Remarks

UL94V-0

–––––––

–––––––

B15

Share Link: