For board-to-board For board-to-FPC
Narrow pitch connectors
(0.4mm pitch)
P4
Mated heights of 1.5 to 3.5 mm supported with “TOUGH CONTACT”
construction to withstand of tough environments.
FEATURES
1. Mated heights of 1.5 to 3.5 mm is available
2. “TOUGH CONTACT” construction provides high
resistance to various environment.
3. Pattern wiring is possible on PC board of the connector
undersurface
5.1mm
Socket
3.96mm
Header
APPLICATIONS
Mobile devices and industrial equipment
DETAILED FEATURES
Construction makes designing devices easier.
The lower connector bottom surface construction prevents
contact and shorts between the PC board and metal terminals.
This flexibility of pattern wiring is helping to make PC board’s
smaller.
<Socket>
<Header>
Insulation area
Constructed with impact dispersion keys inside the body to
disperse shocks when dropped
A high level of shock resistance is ensured by dispersing impact
over the four locations where the socket indentations and header
protrusions are mated together.
Note: Pins 18 or less are not supported due to suction surface considerations.
Socket Impact dispersion key
Insulation area
Connector bottom: Create any thru-hole and pattern wiring.
Header
Contributes to improved mating
1) Mating insertion guide
Guides are provided to take up any position shift and facilitate
insertion.
Insertion guide
2) Simple lock construction
Simple lock construction provides tactile feedback to ensure
excellent mating/unmating operation feel.
Header side
post
Simple lock
construction
Socket side
contact
–1–
ACCTB110E 201809-T