AXK720147GA 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
生产厂家
AXK720147GA Datasheet PDF : 11 Pages
| |||
Narrow pitch connectors P4 (0.4mm pitch)
NOTES (Unit: mm)
As shown below, excess force during insertion may result
in damage to the connector or removal of the solder. Also,
to prevent connector damage please confirm the correct
position before mating connectors.
Keep the PC board warp no more than 0.03 mm in relation
to the overall length of the connector.
Max. 0.03 mm
Max. 0.03 mm
Design of PC board patterns
Conduct the recommended foot pattern design, in order to
preserve the mechanical strength of terminal solder areas.
Recommended PC board and metal mask patterns
Connectors are mounted with high pitch density, intervals of 0.35
mm, 0.4 mm or 0.5 mm. In order to reduce solder and flux rise,
solder bridges and other issues make sure the proper levels of
solder is used.
Socket
Recommended PC board pattern
(TOP VIEW)
0.40±0.05
0.23±0.03
0.40±0.05
0.40±0.05
0.115±0.05
The figures are recommended patterns. Please use them as a
reference.
Header
Recommended PC board pattern
(TOP VIEW)
0.40±0.05
0.23±0.03
0.40±0.05
0.40±0.05
0.115±0.05
Recommended metal mask pattern
Metal mask thickness: When 150μm
(Opening ratio: 40%)
0.40±0.01
0.20±0.01
0.35±0.01
0.10±0.01
Recommended metal mask pattern
Metal mask thickness: When 150μm
(Opening ratio: 32%)
0.40±0.01
0.20±0.01
0.35±0.01
0.10±0.01
Recommended metal mask pattern
Metal mask thickness: When 120μm
(Opening ratio: 50%)
0.40±0.01
0.20±0.01
0.35±0.01
0.10±0.01
Recommended metal mask pattern
Metal mask thickness: When 120μm
(Opening ratio: 40%)
0.40±0.01
0.20±0.01
0.35±0.01
0.10±0.01
Please refer to “the latest product specifications” when designing your product.
• Requests to customers:
https://industrial.panasonic.com/ac/e/salespolicies/
–6–
ACCTB110E 201809-T
Share Link: 