DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

1N821(DO35) 查看數據表(PDF) - Microsemi Corporation

零件编号
产品描述 (功能)
生产厂家
1N821(DO35) Datasheet PDF : 3 Pages
1 2 3
SCOTTSDALE DIVISION
1N821 thru 1N829A-1 DO-35
6.2 & 6.55 Volt Temperature Compensated
Zener Reference Diodes
*ELECTRICAL CHARACTERISTICS @ 25oC, unless otherwise specified
JEDEC
TYPE NUMBER
(Note 1 & 5)
ZENER
VOLTAGE
(Note 1 and 4)
VZ @ IZT
ZENER
TEST
CURRENT
IZT
MAXIMUM
ZENER
IMPEDANCE
(Note 2)
ZZT @ IZT
MAXIMUM
REVERSE
CURRENT
IR @ 3 V
VOLTAGE
TEMPERATURE
STABILITY
(VZT MAX)
-55oC to +100oC
(Note 3 and 4)
EFFECTIVE
TEMPERATURE
COEFFICIENT
αVZ
VOLTS
mA
OHMS
µA
mV
%/oC
1N821
5.9 – 6.5
7.5
15
2.0
96
0.01
1N821A
5.9 – 6.5
7.5
10
2.0
96
0.01
1N822†
5.9 – 6.5
7.5
15
2.0
96
0.01
1N823
5.9 – 6.5
7.5
15
2.0
48
0.005
1N823A
5.9 – 6.5
7.5
10
2.0
48
0.005
1N824†
5.9 – 6.5
7.5
15
2.0
48
0.005
1N825
5.9 – 6.5
7.5
15
2.0
19
0.002
1N825A
5.9 – 6.5
7.5
10
2.0
19
0.002
1N826
6.2 – 6.9
7.5
15
2.0
20
0.002
1N827
5.9 – 6.5
7.5
15
2.0
9
0.001
1N827A
5.9 – 6.5
7.5
10
2.0
9
0.001
1N828
6.2 – 6.9
7.5
15
2.0
10
0.001
1N829
5.9 – 6.5
7.5
15
2.0
5
0.0005
1N829A
5.9 – 6.5
7.5
10
2.0
5
0.0005
*JEDEC Registered Data.
†Double Anode; electrical specifications apply under both bias polarities.
NOTES:
1.
2.
3.
4.
5.
Add a “-1” suffix for internal metallurgical bond. When ordering devices with tighter tolerances than specified for the VZ
voltage nominal of 6.15 V, add a hyphened suffix to the part number for desired tolerance, e.g. 1N827-1-2%, 1N829-1-1%,
1N829A-1%, 1N829A-1-1%, etc.
Zener impedance is measured by superimposing 0.75 mA ac rms on 7.5 mA dc @ 25oC.
The maximum allowable change observed over the entire temperature range i.e., the diode voltage will not exceed the
specified mV change at any discrete temperature between the established limits.
Voltage measurements to be performed 15 seconds after application of dc current.
1N821, 1N823, 1N825, 1N827, and 1N829 also have qualification to MIL-PRF-19500/159 by adding the JAN, JANTX, or
JANTXV prefix to part numbers as well as the “-1” suffix; e.g. JANTX1N827-1, JANTXV1N829-1, etc.
Copyright 2003
10-27-2003 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]