BFC233924105 查看數據表（PDF） - Vishay Semiconductors
零件编号
产品描述 (功能)
生产厂家
BFC233924105 Datasheet PDF : 19 Pages
| |||
www.vishay.com
MKP339 X2
Vishay BCcomponents
APPROVALS
SAFETY APPROVALS X2
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
UL 60384-14
CSA-E384-14
CQC
VOLTAGE
310 VAC
310 VAC
310 VAC
310 VAC
VALUE
1 nF to 4.7 μF
1 nF to 4.7 μF
1 nF to 4.7 μF
1 nF to 4.7 μF
FILE NUMBERS
LINK
FI 2016052
www.vishay.com/doc?28179
E354331
E354331
CQC 07001021281 (L)
CQC 06001018290 (F)
www.vishay.com/doc?28184
www.vishay.com/doc?28180
www.vishay.com/doc?28181
CB test certificate
310 VAC
1 nF to 4.7 μF
FI 9369
www.vishay.com/doc?28175
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads.
• For larger pitches the capacitors shall be mounted in the same way and the body clamped.
Space Requirements on Printed Circuit-Board
The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings:
• For products with pitch 15 mm, w = l = 0.3 mm, h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm, h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
Eccentricity
wmax. = W + Δ
Imax. = I + Δ
CBA116
hmax. = h + Δ
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C, RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 21-Sep-16
11
Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 