NCS37012MNTWG 查看數據表（PDF） - ON Semiconductor

零件编号

产品描述 (功能)

生产厂家

NCS37012MNTWG

Self Test Ground Fault Circuit Interrupter (GFCI)

ON Semiconductor 

NCS37012

Table 3. ABSOLUTE MAXIMUM RATINGS

Rating

Symbol

Value

Unit

Supply Voltage Range

Vs

6.0 to 12 V

V

Input Voltage Range (Note 1)

Output Voltage Range

Vin

−0.3 to 6.0

V

Vout

−0.3 to 6.0 V or (Vin + 0.3),

V

whichever is lower

Maximum Junction Temperature

TJ(max)

140

°C

Storage Temperature Range

TSTG

−65 to 150

°C

ESD Capability, Human Body Model (Note 2)

ESDHBM

2

kV

ESD Capability, Machine Model (Note 2)

ESDMM

200

V

Lead Temperature Soldering

TSLD

260

°C

Reflow (SMD Styles Only), Pb−Free Versions (Note 3)

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.

2. This device series incorporates ESD protection and is tested by the following methods:

ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)

ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)

Latchup Current Maximum Rating: v150 mA per JEDEC standard: JESD78

3. For information, please refer to our Soldering and Mounting Techniques Reference Manual, SOLDERRM/D

Table 4. THERMAL CHARACTERISTICS

Rating

Symbol

Value

Thermal Characteristics, QFN16, 3x3.3 mm (Note 4)

Thermal Resistance, Junction−to−Air (Note 5)

Thermal Reference, Junction−to−Lead2 (Note 5)

Thermal Characteristics, TSOP−5 (Note 4)

Thermal Resistance, Junction−to−Air (Note 5)

RqJA

RYJL

RqJA

TBD

TBD

TBD

4. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.

5. Values based on copper area of 645 mm2 (or 1 in2) of 1 oz copper thickness and FR4 PCB substrate.

Unit

°C/W

°C/W

Table 5. OPERATING RANGES (Note 6)

Parameter

Conditions

Min

Typ

Operating Temperature

−40

IDD in typical power state

2.0

Stimulus Generator Frequency

Tri−tone

3.1

SCR Trigger Current

SCR Trigger output voltage

With 5 V supply

4.5

Fault Current Sensitivity

Programmable with CTresD

4.6

4.8

Ground Fault Response Time

5 − 20 mA

150

Ground Fault Response Time

20 − 40 mA

75

Ground Fault Response Time

>40 mA

25

Saturation Fault Response Time

>300 mA

1.4

CT Turns Ratio

200

Ground – Neutral Detection Threshold

Total series impedance (Rn and Rg)

3.0

Internal Oscillator Frequency

2.0

CT Stimulus Current

Internally limited

CT Driver Closed Loop BW

6. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.

Max Units

85

C

mA

3.4

kHz

8.0

mA

5.5

V

5.0

mA

ms

ms

ms

ms

300

6.0

W

MHz

1.0

mA

500

kHz

http://onsemi.com

4

Share Link: