DS1813R-15/TR 查看數據表（PDF） - Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

DS1813R-15/TR

5V EconoReset with Pushbutton

Maxim Integrated 

DS1813

NOTES:

1) All voltages are referenced to ground.

2) Measured with VCC ≥ 2.7V.

3) A 1kΩ external resistor may be required in some applications for proper operation of the

microprocessor reset control circuit.

4) Measured with RST output open.

5) tR = 5µs.

6) VOH and IOH are a function of the value of RP and the associated output load conditions.

7) This value is for reference in defining values for tRPD and should not be considered a requirement for

proper operation or use of the device.

PART MARKING CODES

“A,” “B,” and “C” represent the device type.

810 . . . . DS1810

811 . . . . DS1811

812 . . . . DS1812

813 . . . . DS1813

815 . . . . DS1815

816 . . . . DS1816

817 . . . . DS1817

818 . . . . DS1818

“D” represents the device tolerance.

A . . . . . . 5%

B . . . . . . 10%

C . . . . . . 15%

D . . . . . . 20%

5 of 5

Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product.

No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600

© 2006 Maxim Integrated Products • Printed USA

The Maxim logo is a registered trademark of Maxim Integrated Products, Inc. The Dallas logo is a registered trademark of Dallas Semiconductor Corporation.

Share Link: