TRG70A120 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

TRG70A120

70W SWITCHING ADAPTER

Unspecified 

Specifications

TRG70 Series Derating Curve

INPUT SPECIFICATIONS:

Voltage …...………........….................................................... 90~264Vac

Frequency ………………………………………….……………..... 50 to 60Hz

Inrush Current ………………….………….................... 80A max. @240Vac

Conducted EMI ………………………….………………CISPR/FCC Class B

Leakage Current …………………………………………….…… 3.5mA max.

OUTPUT SPECIFICATIONS:

Holdup Time ……………………………………………… 8ms typ. @115Vac

Short Circuit Protection ………………………….……………… Continuous

Over Voltage Protection ……………...........................................….....… Yes

Temperature Coefficient ……………………............................… ±0.05%/℃

GENERAL SPECIFICATIONS:

Isolation ………………………………………… Input to output = 4,242VDC

Operating Temperature .............................. 0 ~ 60℃ (see derating curve)

Storage Temperature ……………………………...….......……........ -20~85℃

Humidity …………………..….......……........ 93% RH max. Non condensing

Cooling …………………………………..……………….. Natural Convection

Switching Frequency …………………………………………… 60KHz Typical

MTBF ……… MIL-HDBK-217F, GB, at 25℃/115VAC ………. 200K hrs min.

Altitude …………………………………………………………………… 2000m

Dimensions ……..…. 5.197x2.283x1.201 inches (132.00x58.00x30.50 mm)

Weight ……………………………………………………… 345g(0.76 Pounds)

AC Inlet ……………….…………………………………...……… IEC320/C14

SAFETY AND EMC:

Emission and lmmunity ………… EN55022 Class B, FCC Part 15 Class B

EN61000-6-3,EN61000-3-2,EN61000-3-3

EN55024, EN61204-3, EN61000-6-1

Safety ………………………………… IEC60950-1, EN60950-1, UL60950-1

Mechanical Specification

All Dimensions are in inches(mm)

Tolerance:Inches:X.XXX±0.02

Millimeters:X.XX±0.5

100%

75%

50%

25%

0%

0

20LFM(Natural Convection)

10 20 30 40 50 60

Ambient Temperature(oC)

NOTE:

1. Voltage setpoint at 60% full load

2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for

Ripple & Noise measurement @20MHz BW.

3. Line regulation measured from 100Vac to 240Vac with full load.

4. Load regulation measured from 60% to 100% full load and from 60% to

20% full load (60% +/- 40% full load)

5. ”Various TR Series adapters are PSE certified. PSE certification

alone is not sufficient for importation into Japan. A valid PSE mark

must contain the name of the importer as shown in the example below.

If PSE mark is required, the name of the registered importer must be

supplied to Cincon on order placement. Product labels will not contain

PSE mark if importer name is not supplied. Consult factory or local

representative for details”

LED

IEC320/C14

DC Plug type: V+ ─●)─ V-

DC Plug :Right Angle(ψ5.5／ψ2.1) L12mm

18AWG／1800mm

Typical at 25˚C, nominal line and 75% load, unless otherwise Specified

2

Share Link: