NAH,NAC,NAM,NAP series
External view
As this product is adopted push-down type terminal block, this appearance is as follows.
1The terminal cover is retracted inside the unit.
2The screws for connecting the terminals are held in the up right position.
Standard Type
2-f4.8
[0.19]
Mounting Hole
Input
Terminal
92
[3.62]
82 ±0.5
[3.23]
77
[3.03]
Name Plate
2-Protection Earth
(2.5)
[0.1]
27
[1.06]
8
[0.31]
Output
Terminal
Input
Terminal
Terminal cover
6-M4
¶ Closed the terminal cover
Output
Terminal
Terminal cover
Mounting Plate
¶ Tolerance : ±1 [±0.04]
¶ Weight : 300g max
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]
¶ Case : PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
DIN rail installation Type
Input
Terminal
Input
Terminal
Terminal cover
6-M4
¶ Closed the terminal cover
92
[3.62]
77
[3.03]
(11)
[0.43]
2-Protection Earth
(2.5)
[0.1]
27
[1.06] 8
[0.31]
Name Plate
Output
Terminal
Output
Terminal
Terminal cover Mounting Plate
DIN rail
¶ Tolerance : ±1 [±0.04]
¶ Weight : 300g max
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]
¶ Case : PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
¡Note when installing the EMI/EMC
Filter on a DIN rail.
When the EMI/EMC Filter is grounded through
the DIN rail, the proper noise attenuation may not
be achieved.
Be sure to connect the protection earth (PE) of
the EMI/EMC Filter body to the earth.
It can connect the ground to either one only.
Name Plate
DIN rail
NA-5