TRG25033 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

TRG25033

25W SWITCHING ADAPTER

Unspecified 

Specifications

INPUT SPECIFICATIONS:

Voltage …....………........…........................................... 90~264Vac

Frequency ………………………………………….……………..... 47 to 63Hz

Inrush Current ………………….……………................... 0.7A max.

Inrush Current ………………….……………................... 50A max. @240Vac

Conducted EMI …………………………….…………... CISPR/FCC Class B

Leakage Current …………………………………………………. 0.25mA max.

OUTPUT SPECIFICATIONS:

Holdup Time ……………………………………………… 10ms typ. @115Vac

Short Circuit Protection …………….…………… Continuous(Auto Recovery)

Over Voltage Protection ………………. ............... TVS Component to Clamp

Temperature Coefficient ……………………............................… ±0.05%/℃

GENERAL SPECIFICATIONS:

Isolation ………………………………….…..…… Input to output = 4,242VDC

Operating Temperature ................................... 0 ~ 60℃(see derating curve)

Storage Temperature ………………….…………...….......……........ -20~85℃

Humidity …………………...….......…........... 93% RH max. Non condensing

Cooling ………………………………….………………….. Natural Convection

Switching Frequency ………………………….……………….. 65KHz Typical

MTBF …….… MIL-HDBK-217F, GB, 25℃/115VAC ……… 300K hrs min.

Altitude …………………………………………………………………… 2000m

Dimensions ……….….. 3.169x1.932x2.205Inches (80.5x49.06x56.00mm)

Weight ………………………………………………….…… 280g(0.62 Pounds)

SAFETY AND EMC:

Emission and lmmunity ……….… EN55022 Class B, FCC Part 15 Class B

EN61000-6-3, EN61000-3-2, EN61000-3-3

EN55024, EN61204-3, EN61000-6-1

Safety …………………………….…… IEC60950-1, EN60950-1, UL60950-1

NOTE:

1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for

Ripple & Noise measuring @20MHz BW.

2. Voltage setpoint at 60% full load.

3. Line regulation measured from 100Vac to 240Vac, full load.

4. Load regulation measured from 60% to 100% full load and from 60% to

20% load (60% +/- 40% full load).

5. Typical efficiency at 230VAC and full load at 25℃.

6. ”Various TR Series adapters are PSE certified. PSE certification

alone is not sufficient for importation into Japan. A valid PSE mark

must contain the name of the importer as shown in the example below.

If PSE mark is required, the name of the registered importer must be

supplied to Cincon on order placement. Product labels will not contain

PSE mark if importer name is not supplied. Consult factory or local

representative for details”.

TRG25 Series Derating Curve

100%

75%

50%

25%

0%

0

20LFM(Natural Conv ection)

10

20

30

40

50

60

Ambient Temperature(oC)

Typical at 25˚C, nominal line and 75% load, unless otherwise Specified

2

V15

Mechanical Specification

Share Link: