TBS1000B 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

TBS1000B

Digital Storage Oscilloscopes

Unspecified 

TBS1000B Digital Storage Oscilloscopes

Extensive monitoring and analysis tools

Intermittent faults can be hard to evaluate, simply because they do not

repeat often making them difficult to capture. The TrendPlot™ function

helps find those faults by plotting measurement values over long periods of

time. Select the measurement to capture on either or both channels and

then set-up the oscilloscope to continuously monitor those measurements,

plot the data on the display and simultaneously save the information to a

USB thumb drive. Depending on the oscilloscope setting, you'll be able to

capture data for minutes, hours or even days; the only limitation is the size

of the thumb drive.

Flexible data transfer

The USB host port on the front panel enables you to save your instrument

settings, screenshots, and waveform data onto a USB memory device. This

port also supports the built-in Data Logging feature which enables you to

set up the oscilloscope to save user- specified triggered waveforms to a

USB device for up to 24 hours. You can also select the "Infinite" option for

continuous waveform monitoring. In the infinite mode you can save your

triggered waveforms to an external USB memory device without a duration

limitation until the memory device is full. The oscilloscope will then guide

you to insert another USB memory device to continue saving waveforms.

To find intermittent faults the TrendPlot ™ function can monitor measurements for long

periods of time.

Often, only Pass/Fail data is needed to determine if a signal is good. This

can be accomplished easily with the TBS1000B Limit Test feature. The

oscilloscope can be set-up to automatically monitor a source signals and

output Pass or Fail results by evaluating whether the acquired waveform

falls within predefined boundaries. The TBS1000B Limit Test feature allows

users to create templates based on one or two independent reference

waveforms, providing more flexibility when creating masks for complex

signals. If a failure is detected, a series of specific actions can be triggered

which include; stopping waveform acquisition, halting Limit Test functions,

saving a screen image of the failed waveform, or any combination of the

above.

Data logging enables automatic saving of triggered waveforms.

Designed to make your work easy

The TBS1000B series oscilloscopes are designed with the ease of use and

familiar operation you have come to expect from Tektronix.

Intuitive operation

The intuitive user interface with dedicated per-channel vertical controls,

auto-setup, and auto-ranging makes these instruments easy to use,

reducing learning time and increasing efficiency.

The Limit Test feature provides a quick Pass/Fail comparison between any triggered

input signal and a user- defined template.

www.tektronix.com 3

Share Link: