C1206F104K1RACTU 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

C1206F104K1RACTU

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

Unspecified 

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

Open Mode Design (FO-CAP), X7R Dielectric, 16 – 200 VDC (Commercial & Automotive Grade)

Environmental Compliance

Lead (Pb)-free, RoHS, and REACH compliant without exemptions (excluding SnPb termination finish option).

Electrical Parameters/Characteristics

Item

Parameters/Characteristics

Operating Temperature Range

Capacitance Change with Reference to

+25°C and 0 Vdc Applied (TCC)

1Aging Rate (Maximum % Capacitance Loss/Decade Hour)

2Dielectric Withstanding Voltage (DWV)

3Dissipation Factor (DF) Maximum Limit at 25°C

−55°C to +125°C

±15%

3.0%

250% of rated voltage

(5±1 seconds and charge/discharge not exceeding 50mA)

5%(6.3V & 10V), 3.5%(16V & 25V) and 2.5%(50V to 250V)

4Insulation Resistance (IR) Minimum Limit at 25°C

See Insulation Resistance Limit Table

(Rated voltage applied for 120±5 seconds at 25°C)

1 Regarding Aging Rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.

2 DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the

capacitor.

3 Capacitance and dissipation factor (DF) measured under the following conditions:

1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance ≤10µF

120Hz ± 10Hz and 0.5 ± 0.1 Vrms if capacitance >10µF

4 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.

Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as

Automatic Level Control (ALC). The ALC feature should be switched to "ON".

Post Environmental Limits

Dielectric

X7R

High Temperature Life, Biased Humidity, Moisture Resistance

Rated DC

Voltage

Capacitance Dissipation Factor Capacitance

Value

(Maximum %)

Shift

Insulation

Resistance

> 25

16/25

All

< 16

3.0

5.0

±20%

10% of Initial

Limit

7.5

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1012_X7R_OPENMODE_SMD • 10/14/2016 5

Share Link: