TOOLSTICK326PP 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

TOOLSTICK326PP

ToolStick Programming Adapter

Unspecified 

ToolStick Programming Adapter

Step 3. Insert the MCU into the socket

Note: The Programming Adapter has a diagram of the MCU that shows the proper orientation of the MCU in the socket. The

circle in the diagram corresponds to the circle on the top-side of the package. Please check the orientation of the device

before inserting into the socket. Inserting the device incorrectly into the socket could damage the device.

Figure 7. Socket Orientation

The procedure for inserting the device into the socket depends on the type of socket (Clam-Shell, Top-Loader, or

ZIF).

Inserting a device into a Clam-Shell socket

Figure 8. Clam-Shell Socket

A. Ensure that the ToolStick Base Adapter and the daughter card are on a level surface.

B. Press the latch to open the socket.

C. Using the tweezers, carefully insert the device into the socket in the same orientation that is shown in the orientation

diagram on the daughter card.

D. Slowly close the socket so that the device does not move during the process.

Rev. 0.3

5

Share Link: