NCP565/NCV565
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input Voltage (Note 1)
Vin
18
V
Output Pin Voltage
Vout
−0.3 to Vin + 0.3
V
Adjust Pin Voltage
Vadj
−0.3 to Vin + 0.3
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
NOTE: This device series contains ESD protection and exceeds the following tests:
Human Body Model JESD 22−A114−B
Machine Model JESD 22−A115−A
THERMAL CHARACTERISTICS
Rating
Thermal Characteristics SOT−223 (Notes 1, 2)
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Pin
Thermal Characteristics DFN6 (Notes 1, 2)
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Pin
Thermal Characteristics D2PAK (5ld) (Notes 1, 2)
Thermal Resistance, Junction−to−Case
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Pin
Symbol
RqJA
RqJP
RqJA
RqJP
RqJC
RqJA
RqJP
Value
107
12
176
37
3
105
4
Unit
°C/W
°C/W
°C/W
OPERATING RANGES
Rating
Symbol
Value
Unit
Operating Input Voltage (Note 1)
Vin
Vout + VDO,
V
2.5 (Note 3) to 9
Operating Junction Temperature Range
TJ
Operating Ambient Temperature Range
TA
Storage Temperature Range
Tstg
1. Refer to Electrical Characteristics and Application Information for Safe Operating Area.
2. As measured using a copper heat spreading area of 50 mm2, 1 oz copper thickness.
3. Minimum Vin = (Vout + VDO) or 2.5 V, whichever is higher.
−40 to 150
°C
−40 to 125
°C
−55 to 150
°C
http://onsemi.com
3