BP2833D 查看數據表（PDF） - Bright Power Semiconductor

零件编号

产品描述 (功能)

生产厂家

BP2833D

Non-isolated Buck Offline LED Driver

Bright Power Semiconductor 

晶丰明源半导体

BP2833D

Non-isolated Buck Offline LED Driver

Absolute Maximum Ratings (note1)

Symbol

Parameters

Range

Units

ICC_MAX

DRAIN

VCC pin maximum sink current

Internal HV MOSFET drain voltage

5

mA

-0.3~500

V

CS

Current sense pin input voltage

-0.3~6

V

ROVP Over-voltage setting pin voltage

-0.3~6

V

PDMAX

θJA

TJ

TSTG

Power dissipation (note 2)

Thermal resistance (Junction to Ambient)

Operating junction temperature

Storage temperature range

0.9

80

-40 to 150

-55 to 150

W

℃/W

℃

℃

ESD (note 3)

2

KV

Note 1: Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. Under “recommended operating

conditions” the device operation is assured, but some particular parameter may not be achieved. The electrical characteristics table defines the operation

range of the device, the electrical characteristics is assured on DC and AC voltage by test program. For the parameters without minimum and maximum

value in the EC table, the typical value defines the operation range, the accuracy is not guaranteed by spec.

Note 2: The maximum power dissipation decrease if temperature rise, it is decided by TJMAX, θJA, and environment temperature (TA). The maximum power

dissipation is the lower one between PDMAX = (TJMAX - TA)/ θJA and the number listed in the maximum table.

Note 3: Human Body mode, 100pF capacitor discharge on 1.5KΩ resistor

Recommended Operation Conditions

Symbol

Parameter

Range

Unit

Output LED current @ Vout=72V

ILED1

(Input voltage 176V～265V)

320

mA

Output LED current @ Vout=36V

ILED2

(Input voltage 176V～265V)

360

mA

VLED min

Minimum LED Loading Voltage

>15

V

BP2833D_EN _DS_Rev.1.0

www.bpsemi.com

3

BPS Confidential – Customer Use Only

Share Link: