AXK720147G(2013) 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
生产厂家
AXK720147G
(Rev.:2013)
(Rev.:2013)
Panasonic Corporation
AXK720147G Datasheet PDF : 15 Pages
| |||
AXK7, 8
SPECIFICATIONS
1. Characteristics
Electrical
characteristics
Item
Rated current
Rated voltage
Breakdown voltage
Insulation resistance
Contact resistance
Composite insertion force
Mechanical
characteristics
Composite removal force
Post holding force
Ambient temperature
Soldering heat resistance
Storage temperature
Specifications
Conditions
0.3A/pin contact (Max. 5 A at total pin contacts)
60V AC/DC
150V AC for 1 min.
Detection current: 1mA
Min. 1,000MΩ (initial)
Using 250V DC megger (applied for 1 min.)
Max. 70mΩ
Based on the contact resistance measurement method
specified by JIS C 5402.
Max. 0.981N/pin contacts × pin contacts (initial)
Min. 0.0588N/pin contacts × pin contacts
(Mated height 1.5 mm without soldering terminals type)
Min. 0.118N/pin contacts × pin contacts
All the other types except the above
(Mated height 1.5 mm without soldering terminals type)
Min. 0.981N/pin contacts
Measuring the maximum force.
As the contact is axially pull out.
–55°C to +85°C
No freezing at low temperatures
Max. peak temperature of 260°C (on the surface of the
PC board around the connector terminals)
Infrared reflow soldering
300°C within 5 sec. 350°C within 3 sec.
Soldering iron
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
No freezing at low temperatures.
No dew condensation.
Conformed to MIL-STD-202F, method 107G
Environmental
characteristics
Thermal shock resistance
(header and socket mated)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
Order
1
2
3
4
Temperature (°C)
–55
0
−3
85
+3
0
–55
0
−3
Time (minutes)
30
Max. 5
30
Max. 5
Lifetime
characteristics
Unit weight
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H2S resistance
(header and socket mated)
Insertion and removal life
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
48 hours,
contact resistance max. 70mΩ
50 times
Mated height 1.5mm, 20 pin contacts;
Socket: 0.04g Header: 0.02g
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200
times/hours
2. Material and surface treatment
Part name
Material
Molded portion
LCP resin (UL94V-0)
Contact and Post
Copper alloy
Soldering terminals portion
Copper alloy
Surface treatment
—
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, upper terminal of Ni barrier production: Exposed over Ni
The area adjacent to the terminal of the sockets on models with Ni barrier is exposed to Ni on base.
Ni plating on base, Sn plating on surface (Except for front terminal)
ACCTB57E 201303-T
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
Share Link: