ES1000-NO.1-C1-X-45MM 查看數據表（PDF） - TE Connectivity

零件编号

产品描述 (功能)

生产厂家

ES1000-NO.1-C1-X-45MM

Semirigid, adhesive-lined heat-shrinkable tubing (extended temperature range)

TE Connectivity 

ES1000

Semirigid, adhesive-lined heat-shrinkable

tubing (extended temperature range)

Clear, adhesive-lined ES1000

heat-shrinkable tubing is specifically

designed for environmental sealing

and electrical insulation of wire

splices, terminations, and

components where see-through

inspection is required.

ES1000 tubing has an outer jacket of

radiation-crosslinked, semirigid

polyolefin. The jacket is mechanically

tough, providing strain relief and

abrasion protection of wire splices

and mechanically sensitive

components. The inner layer of the

tubing is a unique hot-melt adhesive,

specially formulated to seal to most

types of commercial wire insulation,

and to perform well at an extended

temperature range. The thick

adhesive forms an effective barrier

against fluids and moisture, helping to

protect the harness from the effects

of corrosion and water wicking.

Because ES1000 tubing has a high

shrink ratio, only a few sizes are

needed to cover a wide range of

splice and component diameters.

ES1000 tubing dimensions have

been engineered to provide low-

cost sealing solutions on multiple-

wire splices (up to seven wires per

side), using standard Raychem

application equipment.

Temperature rating

Full recovery temperature:

Continuous operating temperature:

135°C

–40°C to 130°C

Specifications*

Type

ES1000

Raychem

RT-1113

*When ordering, always specify latest issue.



UL

E85381

Dimensions (millimeters/inches)

Expanded as supplied

Fully recovered

after heating

D

W1 W2

d

W

Inside diameter (including core)

D (min.)

d (max.)

Expanded

Recovered after

Part number

as supplied

heating

ES1000-No.1

5.72 0.225

1.27 0.050

ES1000-No.2

7.44 0.293

1.65 0.065

ES1000-No.3

10.85 0.427

2.41 0.095

ES1000-No.4

17.78 0.700

4.45 0.175

**Wall thickness will be less if tubing recovery is restricted during shrinkage.

Recovered wall thickness**

W

W1

Minimum

Minimum

total wall

jacket wall

1.20 0.047

0.64 0.025

1.52 0.060

0.76 0.030

1.91 0.075

0.89 0.035

2.41 0.095

1.04 0.041

Ordering information

Color

Size selection

Standard packaging

Marking

Ordering description

Clear

Always order the largest size that will shrink snugly over the component being covered.

Cut pieces. See reverse for information on standard cut lengths.

Tubing will be marked with the number size (for example, ES-1, ES-2, ES-3, or ES-4).

Specify product name, size, color, and cut length; for example, ES1000-No.2-X-50MM (X=Clear).

W2

Minimum

adhesive wall

0.56 0.022

0.76 0.030

1.02 0.040

1.37 0.054

Share Link: