ATTINY4313(2009) 查看數據表（PDF） - Atmel Corporation

零件编号

产品描述 (功能)

生产厂家

ATTINY4313
(Rev.:2009)

8-bit Microcontroller with 2/4K Bytes In-System Programmable Flash

Atmel Corporation 

ATtiny2313A/4313

1.1.4

1.1.5

1.1.6

1.1.7

1.1.8

will source current if the pull-up resistors are activated. The Port A pins are tri-stated when a

reset condition becomes active, even if the clock is not running.

Port A also serves the functions of various special features of the ATtiny2313A/4313 as listed on

page 61.

Port B (PB7..PB0)

Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The

Port B output buffers have symmetrical drive characteristics with both high sink and source

capability. As inputs, Port B pins that are externally pulled low will source current if the pull-up

resistors are activated. The Port B pins are tri-stated when a reset condition becomes active,

even if the clock is not running.

Port B also serves the functions of various special features of the ATtiny2313A/4313 as listed on

page 62.

Port D (PD6..PD0)

Port D is a 7-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The

Port D output buffers have symmetrical drive characteristics with both high sink and source

capability. As inputs, Port D pins that are externally pulled low will source current if the pull-up

resistors are activated. The Port D pins are tri-stated when a reset condition becomes active,

even if the clock is not running.

Port D also serves the functions of various special features of the ATtiny2313A/4313 as listed on

page 66.

RESET

Reset input. A low level on this pin for longer than the minimum pulse length will generate a

reset, even if the clock is not running and provided that the reset pin has not been disabled. The

minimum pulse length is given in Table 21-3 on page 198. Shorter pulses are not guaranteed to

generate a reset. The Reset Input is an alternate function for PA2 and dW.

The reset pin can also be used as a (weak) I/O pin.

XTAL1

Input to the inverting Oscillator amplifier and input to the internal clock operating circuit. XTAL1

is an alternate function for PA0.

XTAL2

Output from the inverting Oscillator amplifier. XTAL2 is an alternate function for PA1.

3

8246AS–AVR–11/09

Share Link: