HA16PRS-3SF-A(71) 查看數據表（PDF） - HIROSE ELECTRIC

零件编号

产品描述 (功能)

生产厂家

HA16PRS-3SF-A(71)

Circular Connectors for Audio Equipment

HIROSE ELECTRIC 

Coupling Combination

Female Pin

(Plug)

HA Series●Circular Connectors for Audio Equipment

Male Pin

(Receptacle)

(Plug-Receptacle)

(Jack)

Termination procedure

Plug side (HA16 type, jack side connector follows the same assembly procedure)

Metal clamper

Screw

3mm approx.

Plug shell unit

Body

Cable end(ref.)

3mm

11mm

Operation procedure

1. Please choose a cable of which the outside diameter is 4-6mm.

2. Strip insulation of the cable end in the size as shown above.

3. Solder the cable to plug shell.

4. Crimp cable clamper, which holds cable, with a tool.

5. Fit the P shell unit to the cord tube, and tighten the locking screw with a Torque of 0.3-0.4N-m(3.5-4kg-cm) to complete

the work.

For details, contact our sales or engineering department before using the model HA16 plugs.

Receptacle side

Precautions

If heat shrink tubing is applied to the solder terminating section for

insulation purposes, overheating could reduce the torque of the screw

tightness.

Such overheating may result in loosening and possible loss of the

screw. It is advised to confirm that a minimum torque of at least 0.1 N•m

is obtained after termination.

If a torque of at least 0.1 N•m is not realized, the screw should be

tightened to between 0.3 and 0.4 N•m.

For details on usage, please contact our Sales or Engineering Department.

Screw

9

Share Link: