ACS717 查看數據表（PDF） - Allegro MicroSystems
零件编号
产品描述 (功能)
生产厂家
ACS717 Datasheet PDF : 14 Pages
| |||
ACS717
High Isolation Linear Current Sensor IC with
850 µΩ Current Conductor
DEFINITIONS OF DYNAMIC RESPONSE CHARACTERISTICS
Power-On Time (tPO)
When the supply is ramped to its operating voltage, the device
requires a finite time to power its internal components before
responding to an input magnetic field.
Power-On Time (tPO) is defined as the time it takes for the output
voltage to settle within ±10% of its steady state value under an
applied magnetic field, after the power supply has reached its
minimum specified operating voltage, VCC(min), as shown in the
chart at right.
Rise Time (tr)
The time interval between a) when the sensor IC reaches 10% of
its full scale value, and b) when it reaches 90% of its full scale
value.
Propagation Delay (tpd )
The propagation delay is measured as the time interval a) when
the primary current signal reaches 20% of its final value, and b)
when the device reaches 20% of its output corresponding to the
applied current.
Response Time (tRESPONSE)
The time interval between a) when the primary current signal
reaches 90% of its final value, and b) when the device reaches
90% of its output corresponding to the applied current.
V
VCC(typ.)
90% VIOUT
VCC
VIOUT
VCC(min.)
tPO
t1
t2
t1= time at which power supply reaches
minimum specified operating voltage
t2= time at which output voltage settles
within ±10% of its steady state value
under an applied magnetic field
0
t
Figure 4: Power-On Time
(%)
Primary Current
90
VIOUT
Rise Time, tr
20
10
0
Propagation Delay, tpd
t
Figure 5: Rise Time and Propagation Delay
(%)
Primary Current
90
VIOUT
Response Time, tRESPONSE
0
t
Figure 6: Response Time
Allegro MicroSystems, LLC
11
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Share Link: 