MIC7300 查看數據表（PDF） - Micrel

零件编号

产品描述 (功能)

生产厂家

MIC7300

High-Output Drive Rail-to-Rail Op Amp

Micrel 

MIC7300

Micrel

Note 1. Exceeding the absolute maximum rating may damage the device.

Note 2. The device is not guaranteed to function outside its operating rating.

Note 3. I/O Pin Voltage is any external voltage to which an input or output is referenced.

Note 4.

Note 5.

Note 6.

The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max); the junction-to-ambient thermal

resistance, θJA; and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using:

PD = (TJ(max) – TA) ÷ θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature.

Thermal resistance, θJA, applies to a part soldered on a printed-circuit board.

Devices are ESD protected; however, handling precautions are recommended.

Note 7. All limits guaranteed by testing or statistical analysis.

Note 8. Continuous short circuit may exceed absolute maximum TJ under some conditions.

Note 9. CMRR is determined as follows: The maximum ∆VOS over the VCM range is divided by the magnitude of the VCM range. The measurement

points are: VV–, (VV+ – VV–)/2, and VV+.

Note 10. RL connected to 5V. Sourcing: 5V ≤ VOUT ≤ 10V. Sinking: 2.5V ≤ VOUT ≤ 5V.

Note 11. Device connected as a voltage follower with a 10V step input. The value is the positive or negative slew rate, whichever is slower.

MIC7300

6

June 2005

Share Link: