10SE221 查看數據表（PDF） - Nippon Chemi-Con
零件编号
产品描述 (功能)
生产厂家
10SE221 Datasheet PDF : 5 Pages
| |||
METAL OXIDE VARISTORS TNR®
?MECHANICAL CHARACTERISTICS
Item
Soldering Heat
Resistivity
Solderability
Lead Pull Strength
Lead Bend Strength
Vibration Resistivity
Flammability test
Test Conditions
Store varistor at normal room temperature. Dip the varistor leads to solder, at 350P10C for
3P
1
0
seconds,
up
to
2.0K2.5
mm
from
the
varistor
body.
After
that,
store
the
varistor
at
normal room temperature for 30 miniutes, and measure the varistor voltage.
Dip varistor leads to methanol solutin (JIS K 1501, about 25%) of rosin (JIS Z 5902) for 5K10
seconds. Then, dip the lead to solder (JIS Z 3282 H60A or H63A) at 225K240C, up to 2.0K
2.5mm from the varistor body for 5P0.5 seconds. Then, check the solderability.
Fix varistor body, and suspend specified weight toward direction of lead axis.
Lead diameter
F0.6mm, F0.8mm
Force
10 N
The varistor shall be secured with its terminal kept vertical and the force specified below shall
be applied in the axial direction.
The terminal shall gradually be bend by 90 in one direction then back to original position.
The damage of the terminal shall be visually examined.
Lead diameter
F0.6mm, F0.8mm
Force
2.5 N
Mount varistor body on vibrator, and conduct follwing vibration test.
Peak-to-Peak amplitude : 1.5mm
Vibration frequency range : 10HzK55Hz
Sweeping time:
Approximately one minute for 10Hz 55Hz 10Hz
Direction and duration of vibration :
Three directions of X, Y and Z. Two hours each.
Six hours total.
The varistor shall be subjected to 60 second applications of test flame.
Burner : Bunsen gas burner 9000kcal / m3
Diameter of flame nozzle : F9.5 mm
Position : The specimen shall be fixed horizontal.
Point of application shall be approximately center of the specimen.
Specifications
DV1mA [P5%
Vc : Actual varistor voltage
No mechanical damages
At least, 95% of the surface
dipped to solder shall be
coverd by new solder.
No abnormality such as
disconnection.
DV1mA [P5%
No remarkable damage as
remarkable the inner
ceramic element or
terminal open.
No remarkable appearance
abnormality.
DV1mA P5%
No catching fire, and no
flaming drops.
(5/5)
CAT. No. E1006K
Share Link: 