74HCT4066-Q100 查看數據表（PDF） - NXP Semiconductors.
零件编号
产品描述 (功能)
生产厂家
74HCT4066-Q100 Datasheet PDF : 23 Pages
| |||
NXP Semiconductors
74HC4066-Q100; 74HCT4066-Q100
Quad single-pole single-throw analog switch
10. Dynamic characteristics
Table 9. Dynamic characteristics 74HC4066-Q100
GND = 0 V; tr = tf = 6 ns; CL = 50 pF unless specified otherwise; for test circuit see Figure 12.
Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.
Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.
Symbol Parameter
Conditions
40 C to +85 C
Min Typ[1] Max
tpd
propagation delay nY to nZ or nZ to nY; RL = ; [2]
see Figure 10
VCC = 2.0 V
-
8
75
VCC = 4.5 V
-
3
15
VCC = 6.0 V
-
2
13
toff
turn-off time
VCC = 9.0 V
-
nE to nY or nZ; see Figure 11 [4]
2
10
VCC = 2.0 V
-
44
190
VCC = 4.5 V
-
16
38
VCC = 5.0 V; CL = 15 pF
-
13
-
VCC = 6.0 V
-
13
33
ton
turn-on time
VCC = 9.0 V
-
nE to nY or nZ; see Figure 11 [3]
16
26
VCC = 2.0 V
-
36
125
VCC = 4.5 V
-
13
25
VCC = 5.0 V; CL = 15 pF
-
11
-
VCC = 6.0 V
-
10
21
VCC = 9.0 V
-
8
16
CPD
power dissipation per switch; VI = GND to VCC
[5] 11
-
capacitance
40 C to +125 C Unit
Min
Max
-
90 ns
-
18 ns
-
15 ns
-
12 ns
-
225 ns
-
45 ns
-
- ns
-
38 ns
-
30 ns
-
150 ns
-
30 ns
-
- ns
-
26 ns
-
20 ns
-
- pF
[1] Typical values are measured at Tamb = 25 C.
[2] tpd is the same as tPHL and tPLH.
[3] ton is the same as tPHZ and tPLZ.
[4] toff is the same as tPZH and tPZL.
[5] CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD VCC2 fi + {(CL + Csw) VCC2 fo} where:
fi = input frequency in MHz;
fo = output frequency in MHz;
{(CL + Csw) VCC2 fo} = sum of outputs;
CL = output load capacitance in pF;
Csw = switch capacitance in pF;
VCC = supply voltage in V.
74HC_HCT4066_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 16 December 2013
© NXP B.V. 2013. All rights reserved.
9 of 23
Share Link: 