NJU72013
1.2 Control of V+ terminal and Mute terminal
1.2.2 Power-on procedure
Turn on the V+ in the condition of MUTE terminal is “Low”. After 100msec from power on, change the
control voltage of MUTE terminal (Vcnt) from "Low" to "High".
* It is necessary to stabilize an IC for 100msec.
1.2.3 Power-off procedure
Change the control voltage of MUTE terminal (Vcnt) from "High" to "Low".By the MUTE function, the
output signals are stopped from output terminal.
Turn off the V+.
V+
(3pin)
MUTE
(7pin)
100msec
t
100msec
t
MUTE ON
MUTE OFF
MUTE ON
Fig.4 Power-on / Power-off timing chart
–6–