TLYK16TAP(MT1,F)
Electrical and Optical Characteristics (Ta = 25°C)
Characteristic
Forward voltage
Reverse current
Luminous intensity
Peak emission wavelength
Spectral line half width
Dominant wavelength
Symbol
VF
IR
IV
λP
∆λ
λd
Test Condition
Min Typ. Max Unit
IF = 20 mA
VR = 4 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
(Note2) 1.85 2.25 2.45
V
⎯
⎯
50
µA
(Note2) 3380 5900 19000 mcd
⎯
594
⎯
nm
⎯
13
⎯
nm
(Note2) 587 590 593 nm
Note2: Lamps are classified into the following ranks according to their dominant wavelength and luminous intensity,
forward voltage.
Each packing box includes single luminous Intensity class and single dominant wavelength class.
Dominant wavelength_ rank classification
Rank
Min
Max
Accuracy
2
587
590
3
590
593
Unit
nm
±2nm
⎯
IV _ rank classification
Rank
Min
Max
U
3380
6010
V
6010 10700
W
10700 19000
Unit
mcd
Accuracy
±22.5%
⎯
Forward voltage _ rank classification
Rank
Min
Max
Accuracy
A
1.85
2.05
B
2.05
2.25
C
2.25
2.45
Unit
V
±0.05V
⎯
Precaution
Please be careful of the followings
• Soldering temperature: 260°C max
Soldering time: 3 s max
(Soldering portion of lead: up to 1.6 mm from the body of the device)
• If the lead is formed, the lead should be formed up to 1.6 mm from the body of the device without forming stress
to the resin. Soldering should be performed after lead forming.
• This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure
that it will not be affected by this IR light.
2
2010-03-18