KIT8002A 查看數據表（PDF） - AUK -> KODENSHI CORP

零件编号

产品描述 (功能)

生产厂家

KIT8002A

Photo Interrupter

AUK -> KODENSHI CORP 

KIT8002A

Switching as a Function of Position

1. If the motion of the interrupter flag is vertical(perpendicular to the horizontal aperture slot)

then the output must switch between approximately -0.25 to +0.25mm with respect to the

optical axis.

2. If the motion of the interrupter flag is horizontal(parallel to the horizontal aperture slot)

then the output must switch between approximately -0.50 to +0.50mm with respect to the

optical axis.

Packaging

1. The part package contain the following information:

- Symbol

- Date Code

- Lot Code

- The words "RoHS Compliant"

Cautions in Usage

1. Store and use where there is no exterior force that will cause change in shape.

2. Store and use where there is no Hydrogen Sulfide gas, or any other corrosive gas.

3. The bending or cutting of the lead should be done at room temperature, no force being

applied on the package.

4. Solder the lead pin under conditions of the absolute maximum rating chart, and do not

apply force on the lead pin after soldering.

Guarantee Period and Scope

1. Period

One year after delivery to the desired place.

2. Scope

Replacement of products will be done, if any problems lie in our company's products.

However, we are not liable for your damage by lack of caution.

Others

Any doubts concerning this specification should be discussed fully by both parties.

The contents of this data sheet are subject to change without advance notice for the purpose of improvement.

When using this product, would you please refer to the latest specifications.

Rev. date: 28-JAN-11

KSD-XXXXXX-000

Share Link: