LV5256GP
Continued from preceding page.
Pin No.
Pin Name
Description
18
RT
Oscillation frequency setting pin. Connect a resistor
between this pin and GND. A 100kΩ resistor causes the
oscillator to oscillate at 1MHz (typ.).
Equivalent Circuit
VDD
500Ω
18
10kΩ
19
VDD
20
LGND
Logic system power supply. Apply 3.0V±0.1V to this pin
from an external source.
Logic system ground pin. All voltages are measured with
respect to this voltage level.
Startup Sequence
VDD
ONOFF
VIN
REG_O
VOUT-5
SS
ONOFF:H REG_O startup
UVLO release
VOUT-5 startup
VOUT-5 normal judgment
SS start
SW
Power supply operation beginning
* Be sure to set the ONOFF to 0V when starts or stops VDD. And apply voltage to VIN after VDD started up.
No.A1277-8/9