LA7853 查看數據表（PDF） - SANYO -> Panasonic
零件编号
产品描述 (功能)
生产厂家
LA7853 Datasheet PDF : 4 Pages
| |||
Ordering number:ENN2873
Monolithic Linear IC
LA7853
CRT Display Synchronization
Deflection Circuit
Overview
The LA7853 is a sync deflection circuit IC dedicated to
CRT display use. It can be connected to the LA7832, 7833,
7837, 7838 (for vertical output use) to form a sync deflec-
tion circuit that meets every requirement for CRT display
use.
So far, ICs for color TV use have been applied to the sync
deflection circuit for CRT display use and general-purpose
ICs such as one-shot multivibrator, inverter and a lot of
transistors have been used to form the peripherals such as
sync input interface, horizontal phase shifter. The LA7853
contains these peripherals on chip and adopts a stable cir-
cuit for horizontal oscillation from 15kHz to 100kHz aim-
ing at improving the characteristics requierd for CRT
dispaly use.
The LA7853 has independent GND pins for the horizontal
block and vertical block, thus facilitating pattern layout for
applications where the LA7853 is used at high frequen-
cies.
Package Dimensions
unit:mm
3059-DIP22S
[LA7853]
22
12
1
11
21.2
0.95
0.48
1.78
1.7
SANYO : DIP22S
Features
• The vertical pull-in range is approximately 20Hz, 2 times
that of the LA7852, at fV=60Hz.
• The horizontal oscillation frequency can be adjusted sta-
bly from 15kHz to 100kHz.
• The horizontal display can be shifted right/left.
• The horizontal/vertical sync input can be used intact re-
gardless of the difference in pulse polarity and pulse width.
• The AFC feedback sawtooth wave can be obtained by
simply applying a flyback pulse to the IC as a trigger
pulse.
• Any duty of the horizontal pulse can be set.
• Good vertical linearity because DC bias at vertical output
stage is subject to sampling control within retrace time.
• Excellent interlace and vertical jitter characteristics on
the high-definition display because of independent GND
pins for the horizontal block and vertical block.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O2500TN (KT)/8088YT, TS No.2873–1/4
Share Link: 