DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AMC7585 查看數據表(PDF) - ADDtek Corp

零件编号
产品描述 (功能)
生产厂家
AMC7585
ADDTEK
ADDtek Corp ADDTEK
AMC7585 Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
AMC7585
ELECTRICAL CHARACTERISTICS
Unless otherwise specified, VIN = VOUT + 1.5V, IO = 10mA. These specifications apply operating ambient temperature
range, and are for DC characteristics only. (Low duty cycle pulse testing techniques are used which maintains
junction and case temperatures equal to the ambient temperature.)
Parameter
Symbol
Test Conditions
AMC7585
Units
Min. Typ. Max.
AMC7585-2.5
2.475 2.500 2.525
Output Voltage AMC7585-3.3 VOUT IO = 10mA, TA = 25 OC
3.267 3.300 3.333 V
AMC7585-5.0
4.950 5.000 5.050
AMC7585-2.5
Output Voltage AMC7585-3.3
AMC7585-5.0
VOUT
VIN = VOUT + 1.5V to 10V,
IO = 0mA to 5A
2.450 2.500 2.550
3.234 3.300 3.366 V
4.900 5.000 5.100
Reference
Voltage
AMC7585-ADJ VREF
(Note 1)
IO = 10mA to 5A, (Note 1)
Line Regulation (Note 2)
Load Regulation (Note 2)
ΔVOI (1.5V + VOUT) VIN 7V
ΔVOL IO=10mA to 5A
Dropout Voltage
ΔV IO = 5A (Note 3)
Quiescent Current
( for AMC7585-X.X)
IQ VIN 7V, IO = 10mA to 3A
1.238 1.250 1.262
V
1.230 1.250 1.270
0.04 0.2 %
0.2 0.4 %
1.30 1.50 V
8
13 mA
Adjust Pin Current
( for AMC7585-ADJ)
IADJ
50 120 µA
Current Limit
Minimum Load Current (Note 4)
ICL (VIN - VOUT)=2V
Imin
5.1 6.8
5
A
10 mA
Ripple Rejection (Note 5)
RR
VRIPPLE = 1VPP, IO = 100mA,
fO=120Hz
60 80
dB
Note 1
Note 2:
Output voltage is set to be 2.5V.
Line and load regulations are guaranteed up to maximum power dissipation determined by input/output differential and the output current.
However, the maximum power will not be available over the full input/output voltage range.
Note 3:
Note 4:
Note 5:
The specifications represent the minimum input/output voltage required to maintain 1% regulation.
The minimum load current is the minimum current required to maintain regulation. Normally the current in the resistor divider used to set
the output voltage is selected to meet the minimum load current requirement.
These parameters, although guaranteed, are not tested in production prior to shipment
Copyright © 2007 ADDtek Corp.
5
DD041_G -- OCTOBER 2007

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]