HSMM-C170 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
HSMM-C170 Datasheet PDF : 9 Pages
| |||
4.00 (0.157)
DIM. A
(SEE TABLE 1)
DIM. B
(SEE TABLE 1)
2.00 ± 0.05
(0.079 ± 0.002)
4.00 (0.157)
HSMx-C110/120
POSITION IN
CARRIER TAPE
DIM. A
(SEE TABLE 1)
1.50 (0.059)
CATHODE
DIM. C
(SEE TABLE 1)
1.75 (0.069)
0.20 ± 0.05
(0.008 ± 0.002)
3.50 ± 0.05
(0.138 ± 0.002)
8.00 ± 0.30
(0.315 ± 0.012)
USER FEED
DIRECTION
CARRIER TAPE
COVER TAPE
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
PART NUMBER
DIM. A
DIM. B
DIM. C
± 0.10 (± 0.004) ± 0.10 (± 0.004) ± 0.10 (± 0.004)
HSMx-C191 SERIES
HSMx-C190 SERIES
HSMx-C170 SERIES
HSMx-C110 SERIES
HSMx-C120 SERIES
HSMx-C150 SERIES
1.85 (0.073)
1.75 (0.069)
2.30 (0.091)
3.40 (0.134)
1.90 (0.075)
3.50 (0.138)
0.88 (0.035)
0.90 (0.035)
1.45 (0.057)
1.70 (0.067)
1.15 (0.045)
1.88 (0.074)
0.85 (0.033)
0.90 (0.035)
0.95 (0.037)
1.20 (0.047)
0.75 (0.030)
1.27 (0.050)
DIM. B
(SEE TABLE 1)
Figure 17. Tape dimensions.
R 1.0 ± 0.05
(0.039 ± 0.002)
FOR HSMx-C110
R 0.5 ± 0.05
(0.020 ± 0.002)
FOR HSMx-C120
END
START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
NOTES:
1. All dimensions in millimeters (inches).
2. Tolerance is ± 0.1 mm (± 0.004 in.) unless otherwise specified.
Figure 18. Tape leader and trailer dimensions.
Reflow Soldering:
For more information on reflow solder-
ing, refer to Application Note AN-1060,
Surface Mounting SMT LED Indicator
Components.
Storage Condition:
5 to 30°C @ 60%RH max.
Baking is required before mounting, if:
1. Humidity Indicator Card is > 10% when
read at 23 ± 5°C.
2. Device expose to factory conditions
<30°C/60%RH more than 672 hours.
Recommended baking condition:
60±5°C for 20 hours.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved.
AV02-0592EN - May 5, 2010
Share Link: 