SA534F 查看數據表（PDF） - Philips Electronics
零件编号
产品描述 (功能)
生产厂家
SA534F Datasheet PDF : 7 Pages
| |||
Philips Semiconductors
Low power quad op amps
Product specification
LM124/224/324/324A/
SA534/LM2902
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
UNIT
VCC
Supply voltage
VIN
Differential input voltage
VIN
Input voltage
Maximum power dissipation,
PD
TA=25°C (still-air)1
N package
32 or ±16
VDC
32
VDC
-0.3 to +32
VDC
1420
mW
F package
1190
mW
D package
1040
mW
Output short-circuit to GND one amplifier2
VCC<15VDC and TA=25°C
IIN
Input current (VIN<-0.3V)3
Continuous
50
mA
TA
Operating ambient temperature range
LM324/A
0 to +70
°C
LM224
-25 to +85
°C
SA534
-40 to +85
°C
LM2902
-40 to +125
°C
LM124
-55 to +125
°C
TSTG
Storage temperature range
-65 to +150
°C
TSOLD
Lead soldering temperature (10sec max)
300
°C
NOTES:
1. Derate above 25°C at the following rates:
F package at 9.5mW/°C
N package at 11.4mW/°C
D package at 8.3mW/°C
2. Short-circuits from the output to VCC+ can cause excessive heating and eventual destruction. The maximum output current is approximately
40mA, independent of the magnitude of VCC. At values of supply voltage in excess of +15VDC continuous short-circuits can exceed the
power dissipation ratings and cause eventual destruction.
3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the
input PNP transistors becoming forward biased and thereby acting as input bias clamps. In addition, there is also lateral NPN parasitic
transistor action on the IC chip. This action can cause the output voltages of the op amps to go to the V+ rail (or to ground for a large
overdrive) during the time that the input is driven negative.
1995 Nov 27
2
Share Link: 